Parts of a Tennis Racquet
Also known as: racquet anatomy, parts of a tennis racket, racquet throat, head throat and handle, butt cap, racquet hoop
A tennis racquet is a frame plus strings. ITF Appendix II splits the frame into the head, where the strings attach, the handle you hold, and often a throat that joins them. The strung area inside the head is the hitting surface.
Appendix II of the ITF Rules of Tennis defines the racquet's parts. The racquet is a frame plus strings. The frame has a handle and a head, and it may also have a throat. The head is the part the strings connect to. The handle is the part you hold in normal play. The throat, where there is one, joins the handle to the head.
The hitting surface is the main area of the string pattern inside the head. It must be flat and made of crossed strings that are interlaced or bonded where they cross. The long strings that run from throat to tip are the mains. The short ones that run side to side are the crosses. Under Appendix II, the hitting surface can be at most 39.4 cm (15.5 inches) long and 29.2 cm (11.5 inches) wide.
Players and stringers name smaller parts too. Grommets are plastic inserts that line the string holes. The bumper guard protects the top of the head. The beam is the thickness of the frame. The handle is covered by a base grip, often with an overgrip on top, and ends in a butt cap. The head is also called the hoop. People describe spots on it like a clock face, with 12 o'clock at the tip.
Tips by skill level
Learn three words first: head, throat and handle. Most racquet advice uses them.
Use the clock face when you describe where you hit the strings or where you add weight. 12 o'clock is the tip, and 3 and 9 are the sides of the head.
Example
A stringer tells a player that the crack is in the throat, not the head. The player now knows the damage is in the section that joins the handle to the hoop.
Why it matters
Knowing the parts helps you follow advice on lead tape, grips and stringing. It also helps you describe damage clearly to a stringer.
Common mistakes
- Mixing up mains and crosses when reading a pattern like 16x19.
- Ignoring cracked grommets or a worn bumper guard until strings start breaking.
- Assuming every racquet must have a throat, when the rules say it may not.
Frequently asked questions
What is the throat of a tennis racquet?
It is the part of the frame that joins the handle to the head. ITF Appendix II says a racquet may have a throat but does not have to.
What are mains and crosses?
Mains are the long strings that run from the throat to the tip. Crosses run side to side and weave through the mains.
Sources
Related terms
- Racquet Specs ExplainedRacquet specs tell you how a frame will play. Head size sets the sweet spot, weight sets stability, and balance shows where the weight sits. Head-light means the balance point is nearer the handle, and each 'point' head-light is 1/8 inch. Length runs from the standard 27 inches to the 29-inch legal limit.
- Racquet Rules: Legal Size and StringsYes. The ITF Rules cap a racquet at 29 inches (73.7 cm) long and 12.5 inches (31.7 cm) wide. The strung hitting area can be no more than 15.5 inches long and 11.5 inches wide. The strings must form one flat, generally uniform crossed pattern, and no device or energy source may change how the racquet plays.
- String PatternString pattern is the number of main (vertical) and cross (horizontal) strings, such as 16x19 or 18x20. An open pattern like 16x19 lets the strings move more for extra spin, launch and power. A dense pattern like 18x20 gives a flatter, more controlled ball and usually lasts longer.
- Grommets and Bumper GuardGrommets are plastic inserts that line the string holes around a racquet head, so the strings do not touch the frame. The bumper guard is the strip along the top of the head that shields it from scrapes. Worn grommets can saw through strings early.
- Racquet Sweet SpotThe sweet spot on a tennis racquet is the area near the middle of the strings. Shots hit there feel solid, vibrate least and come off with the most control. A larger head size gives a larger sweet spot. Off-center hits twist the racquet and lose power.
- Lead Tape: Where to Put ItMost players start at 3 and 9 o'clock on the racquet head, which adds stability on off-centre hits and a little extra pop. Moving it up to 2 and 10 o'clock or to 12 o'clock adds more power and makes the racquet more head-heavy. Tape under the grip makes it more head-light, and matching it to tape on the head keeps the balance the same.
Available in other languages
Related guides & benchmarks
Ready to work on your own swing?
This term is background, not something video measures. Film one swing to find the one thing to work on first — free to start.