Skip to main content

机器翻译。英文为参考版本,我们会持续完善措辞。发现可以改进的地方?欢迎告诉我们。

Intermediate

Retest差值

Definition

Retest差值是在你的修正所针对的指标上,从练习前的基线到练习后的Retest之间的变化。它显示一次练习是否带来了改变。

进步差值追踪的是长期的进步,而Retest差值则是对单次练习的即时反馈回路。在专注的练习块之后,你在相同条件下录制同类型的挥动。然后你把关键指标与练习之前记录的做比较。显著的正Retest差值,说明这次练习产生了真正的改变。可以忽略不计的差值,则是一个诚实的信号:要么练习无效,要么模式还没有迁移。

Tips by skill level

Beginner tip

在练习块结束后立刻做Retest,趁着动作模式还新鲜。等到第二天会引入混杂的变量,让差值更难归因于具体的练习。

Advanced note

把你实际完成的练习重复次数和使用的提示,连同你的Retest数据一起记录下来,这样以后的练习可以重复那个产生了被确认的正差值的剂量和提示组合。

Example

练习前的平均杆头路径:+7度;练习后的Retest平均值:+3度。-4度的Retest差值,是一次有意义的练习收获。

How it shows up on video

Compare the skeleton overlay at impact between your pre-drill and post-drill clips for the specific phase the drill targeted. A visible positional change at the target position should correlate with a positive retest delta in the corresponding metric — if you see no visual change, expect a small or zero delta.

Common mistakes

  • 等到第二天才做Retest。练习后的Retest在练习块刚结束、动作模式还新鲜时信息量最大;等待会引入混杂的变量。
  • 在练习前和练习后的组之间改变条件(不同的球杆、不同的目标、不同的热身)。不受控的变量会让Retest差值无法解读。
  • 记录Retest时,没有与练习前的组匹配相同的挥动次数。样本量不相等会让差值的解读不可靠,在样本数很小的时候尤其如此。
  • 把正的Retest差值当作永久的修正。练习后的差值确认模式在这次练习中改变了;在下一次练习中的后续Retest,确认它是否被保持。

In SwingVantage Motion Lab

Motion Lab's retest step compares a retest with an earlier clip. Pick the pre-drill clip to compare against, and its grey skeleton sits under your new one, lined up by swing phase. Metric changes appear only when the two clips are comparable, giving a visual sanity check alongside the numbers.

Still have a question about Retest差值? Ask SwingVantage

See it in a real analysis

Try SwingVantage on one of your own swings — free to start.