Putter Lie Angle
Also known as: putter lie angle, lie angle of a putter, putter lie, upright putter, flat putter lie, putter toe up
Putter lie angle is the angle between the shaft and the ground when the putter sits flat. The Equipment Rules require the shaft to lean at least 10 degrees away from vertical, so a putter cannot stand straight up.
Lie angle describes how upright the shaft sits when the sole rests flat on the ground. Part 2, Section 1d of the Equipment Rules limits it on putters. In the toe-to-heel direction, the shaft must lean at least 10 degrees from vertical. A putter that can be used close to vertical may need to lean as much as 25 degrees. Along the line of play, the shaft must not lean more than 20 degrees forward or 10 degrees back.
In fitting, the aim is for the sole to sit flat at your natural address. If the toe sits up, a lofted face points a little left for a right-hander. If the heel sits up, it points a little right. Left-handers see the mirror image. Because putters have little loft, the effect on aim is small, but it can still matter on short putts.
Lie also affects posture and eye position. A putter that is too upright can push you to stand taller. One that is too flat can pull your hands out and away. Length and lie are best fitted together.
Tips by skill level
Set up to a putt and look at the sole. If the toe or heel is clearly off the ground, ask a fitter to check the lie.
Fit lie at your real putting posture, eyes and all. A lie that suits a static check may not match your stroke posture.
Example
A golfer sets up to putt and notices the toe of his blade is off the ground. A fitter bends the putter two degrees flatter, so the sole sits level at his address.
Why it matters
A putter that does not sit flat can tilt your aim and change your posture. Fitting the lie helps the putter suit your setup.
Common mistakes
- Copying a tour player's lie angle instead of fitting it to your own posture.
- Changing putter length without rechecking the lie.
- Assuming any lie is legal, when the rules require the shaft to lean at least 10 degrees from vertical.
Frequently asked questions
What is the most upright a putter can be?
The shaft must lean at least 10 degrees from vertical in the toe-to-heel direction. Some designs that can be used close to vertical must lean as much as 25 degrees.
Does putter lie angle affect aim?
A little. With loft on the face, a toe sitting up points the face slightly left for a right-hander, and a heel sitting up points it slightly right.
Sources
Related terms
- Putter FittingPutter fitting matches a putter's length, lie angle, loft, and balance style to a golfer's actual stroke path, using putting-specific measuring tools.
- Putter LengthPutter length is fit to a golfer's height, arm length, and preferred posture. Most standard putters run 33 to 35 inches, but a mismatched length forces a compensating posture that changes lie angle and face position at address.
- Lie AngleLie angle is the angle between the shaft and the ground when the club is soled correctly. A lie angle that is too upright pulls shots left; too flat and they drift right (for a right-hander).
- Eyes Over the Ball (Putting)Many coaches suggest setting your eyes directly over the ball or just inside it, on or slightly closer to you than the target line. Eyes well outside or well inside the line can make the line look bent and pull your aim off. Check it by holding a ball at the bridge of your nose and letting it drop.
- Putter LoftPutter loft is the small upward tilt of the putter face. Under the Equipment Rules, a putter can have no more than 10 degrees of loft, and most have only a few degrees.
Available in other languages
Related guides & benchmarks
Ready to work on your own swing?
This term is background, not something video measures. Film one swing to find the one thing to work on first — free to start.