Spring-Like Effect (Characteristic Time)
Also known as: spring-like effect, trampoline effect, characteristic time, CT test, CT limit, coefficient of restitution, COR limit, pendulum test, driver creep
Spring-like effect is how much a clubface flexes and springs back at impact, adding ball speed. The Equipment Rules cap it for every club except putters, using a pendulum test that measures characteristic time (CT).
A thin clubface bends inward at impact and then springs back. That rebound returns energy to the ball, so a springier face adds ball speed. Golf's rules limit this effect. Under Part 2, Section 4c of the Equipment Rules, a clubhead must not exceed the spring limit set in the Pendulum Test Protocol. The limit does not apply to putters.
The limit has changed form over time. In 1998, the United States Golf Association capped the coefficient of restitution (COR) of woods at 0.822, plus a test tolerance. COR compares the ball's rebound speed with its incoming speed. The R&A adopted the limit in 2003. By 2004 both bodies used a pendulum test for drivers and fairway woods instead. It measures characteristic time, or CT, in microseconds. The limit is 239 microseconds plus an 18-microsecond tolerance. The R&A says this matches a COR of 0.822.
A face can get springier with heavy use. The R&A calls this driver creep. In December 2023, golf's two governing bodies said they would expand testing to catch drivers whose CT can pass the limit through regular use. For your own clubs, Rule 4.1a(1) says normal wear does not make a conforming club non-conforming.
Tips by skill level
You do not need to test your own driver. Choose a model made to conform and leave the face unaltered.
Every conforming driver works under the same CT ceiling. So when you test heads, compare strike location, launch and spin as well as peak ball speed.
Example
Before a tour event, an equipment official tests a player's driver with the pendulum. The face reads under the CT limit, so the driver stays in the bag.
Why it matters
Face springiness is one source of ball speed off the driver. The limit explains why a legal driver can only add so much speed through its face.
Common mistakes
- Using a driver sold as 'hot' or 'non-conforming' in a competition, where a stroke with it means disqualification under Rule 4.1a.
- Believing a worn, springier face makes your own driver illegal, when Rule 4.1a(1) keeps a conforming club conforming through normal wear.
- Confusing face springiness with forgiveness, which depends mainly on moment of inertia.
Frequently asked questions
What does CT mean on a driver?
CT stands for characteristic time. It is the pendulum-test measure of how springy a clubface is. The limit is 239 microseconds plus an 18-microsecond tolerance.
Is COR still used to test drivers?
The 0.822 COR limit was the original 1998 test for woods. By 2004 the governing bodies had switched to the pendulum test and characteristic time for drivers and fairway woods.
Does the spring limit apply to putters?
No. Part 2, Section 4c of the Equipment Rules excludes putters.
Sources
- R&A/USGA Equipment Rules, Part 2, Section 4c (Spring Effect and Dynamic Properties)
- R&A, Review of Driver Clubhead Characteristics 1992–2018, section 1 (COR 0.822 in 1998; pendulum test and CT 239 + 18 µs by 2004)
- R&A, Decision to revise golf ball testing conditions beginning in 2028 announced (6 December 2023), driver creep testing
- R&A Rules of Golf, Rule 4.1a(1) (Conforming Clubs)
Related terms
- Is My Driver Legal? (Conforming Clubs)Your driver is legal if it conforms to the Equipment Rules, and an unaltered driver from a major brand is normally designed to. Under Rule 4.1a, a stroke with a non-conforming club means disqualification. Normal wear does not make a club non-conforming.
- Ball SpeedBall speed is how fast the ball leaves the clubface, measured in miles per hour. It is the single biggest driver of carry distance.
- Smash FactorSmash factor is ball speed divided by club speed — a measure of strike efficiency. A driver smash factor near 1.50 means the ball left the face at 1.5× the clubhead speed, the practical maximum.
- Moment of Inertia (MOI)Moment of inertia (MOI) measures a clubhead's resistance to twisting on off-center hits. A higher MOI keeps the face more stable at impact, so perimeter-weighted, forgiving clubs retain more ball speed on mishits.
- Sweet SpotThe sweet spot is the center of percussion on the clubface. A strike there transfers the most energy to the ball, with minimal vibration and maximum distance.
Available in other languages
Related guides & benchmarks
Ready to work on your own swing?
This term is background, not something video measures. Film one swing to find the one thing to work on first — free to start.