Serve Contact Point
Also known as: contact point on the serve, where to hit the ball on the serve, serve contact height, hitting the serve at full reach
The serve contact point is where the racquet meets the ball above you. For most serves it is high, a little in front and slightly to the hitting side. The exact spot shifts with the serve you are hitting.
The serve is hit near full reach, but not with the arm pointing straight up. Kovacs and Ellenbecker report the upper arm raised about 100 degrees from the side of the body just before contact. They suggest an optimum near 110 degrees, give or take 15. The extra height comes from the trunk tilting and the legs pushing up. Elliott's serve model also describes the body extended and off the ground at impact. The racquet is angled to the forearm rather than in line with it.
The contact point moves with the serve type. Tennis Australia's coaching fundamentals note that contact points vary with the serve being hit. Many coaches teach a flat serve met further in front, a slice serve a little more to the hitting side and a kick serve further over the head. Left-handers mirror the sideways positions. Your toss decides which of these you can reach.
Contact that is too low often comes from a toss that has dropped too far, a bent hitting elbow or a trunk that never tilts. Contact too far behind tends to send the ball long or force an arched back. Players often blame the swing when the toss is the real cause.
Tips by skill level
Toss slightly in front and to your hitting side, then reach up and hit the ball as high as is comfortable. If it falls to your head, catch it and toss again.
Film first and second serves side by side at the contact frame. A second-serve contact that drifts lower or further behind is a common source of double faults.
Example
A tall player keeps netting his first serve. Video shows him letting the toss drop to head height before he swings. He starts hitting at the top of his reach, and the serve clears the net more easily.
Why it matters
Contact height and position set the angle the ball can take into the box. They also decide which spins you can put on the ball.
How it shows up on video
Freeze the contact frame from the side. The hitting elbow should be close to straight, the trunk tilted and the ball in front of the head.
Common mistakes
- Letting the toss drop and hitting the ball near head height
- Hitting with a clearly bent elbow at contact
- Using one contact point for flat, slice and kick serves
- Reaching straight up with level shoulders instead of tilting the trunk
Frequently asked questions
Should my arm be straight up when I hit a serve?
Nearly straight at the elbow, but not vertical at the shoulder. In Kovacs and Ellenbecker's review the upper arm sits about 100 degrees from the body. The extra height comes from trunk tilt and leg drive.
Where should I hit a kick serve compared with a flat serve?
Many coaches teach a kick serve contact further over the head and a flat serve contact further in front. Your toss sets up each one.
Sources
- Kovacs M, Ellenbecker T. An 8-Stage Model for Evaluating the Tennis Serve. Sports Health 2011;3(6):504–513 (contact stage)
- Elliott B. Biomechanics and tennis. Br J Sports Med 2006;40(5):392–396 (Figure 1, model of the power serve)
- Tennis Australia, Coach Development Technical Fundamentals (2013), Serve — Yellow stage
Related terms
- Contact PointOn a forehand, meet the ball out in front of your body, at a comfortable distance to the side and around waist height. A one-handed backhand meets the ball even further in front, and a two-handed backhand a little closer to the body. On the serve, hit the ball at full reach, slightly in front.
- Serve Toss PlacementServe toss placement is where the ball is released relative to the body. It determines which serve types are physically possible to hit from that toss.
- Shoulder-Over-Shoulder Rotation (Serve)Shoulder-over-shoulder rotation is the tilted trunk turn of the serve. The front shoulder points up at the toss, then the hitting shoulder drives up over it toward the ball. It raises contact and frees the arm, unlike the level shoulder turn of a groundstroke.
- Flat ServeA flat serve is struck with minimal spin at maximum racquet-head speed. This produces the highest velocity and least margin for error of the three main serve types.
- Slice ServeA slice serve adds sidespin by brushing around the outside of the ball. From a right-hander, it curves away from the deuce-side returner and stays low.
- Kick ServeA kick serve mixes heavy topspin and sidespin. It clears the net safely, then kicks high and sideways, making it the standard high-level second serve.
Available in other languages
Related guides & benchmarks
Put this into practice
Film one swing to see whether this is the thing to work on first — free to start.
See a sample Tennis report first