Trajectoire du barrel (barrel path)
Also known as: trajectoire de batte, trajectoire de swing
La trajectoire du barrel est la trajectoire que le barrel de la batte parcourt à travers la zone de frappe — l’épouser au plan du lancer le plus longtemps possible maximise les chances d’un contact dur.
Les trajectoires de barrel d’élite restent dans la zone de frappe sur un angle légèrement ascendant (épousant le plan descendant du lancer) sur une fenêtre étendue — créant une « longue zone de contact » où les erreurs de timing sont tolérées. Les trajectoires courtes et raides créent de petites fenêtres où le timing doit être presque parfait. La trajectoire du barrel commence par la rotation des hanches, est façonnée par la trajectoire des mains et est influencée par l’angle d’attaque du frappeur. L’analyse de la trajectoire du barrel est l’un des indicateurs les plus directs de l’efficacité mécanique d’un frappeur.
Think about swinging "up through the ball" slightly rather than down at it. This means a slight upward barrel path through the contact zone matches the pitch descent angle and creates a much wider contact window than a chopping motion.
Study your barrel path data in particular on two-strike counts where you have been fooled by off-speed pitches. This means a long barrel path hitter will still barrel those pitches with late adjustment. A short-path hitter will roll over or miss entirely, revealing the path as the limiting factor rather than pitch recognition.
Example
Son barrel est resté sur le plan d’une balle rapide à 94 mph (151 km/h) sur près de 60 cm, lui donnant une large fenêtre pour faire contact même quand son timing était légèrement décalé.
Why it matters
SwingVantage cartographie la trajectoire de votre barrel image par image pour montrer où il entre et sort de la zone — un coup descendant raide (chop) ou un rollover précoce apparaît immédiatement dans l’analyse.
How it shows up on video
On video, barrel path quality is assessed by tracing the trajectory of the barrel tip from launch through contact and measuring how long it stays on the pitch plane. Common errors include a barrel that drops steeply below the pitch plane before contact (producing pop-ups from contact on the bottom of the ball), a barrel that arrives level or slightly downward rather than matching the pitch descent angle (producing weak grounders on pitches below the zone). A barrel that wraps around the outside of the ball rather than driving through it directly (producing pull-side rollovers and reduced exit velocity).
Common mistakes
- Chopping down at the ball in an attempt to create backspin for line drives. This produces a contact window. As a result, small that any timing error results in a miss, pop-up, or grounder
- Allowing the barrel to drop below the hands early in the swing (casting the barrel). This forces the barrel into a downward arc that produces contact below the ball's equator
- Confusing attack angle with barrel path direction. This means a high attack angle does not on its own mean a long barrel path if the barrel enters and exits the zone too steeply on the vertical axis
- Fixing the hand path in isolation without adjusting the attack angle. This can shorten the hand route but still leave the barrel arriving on an inefficient plane relative to the pitch trajectory
In SwingVantage Motion Lab
SwingVantage traces the barrel tip frame-by-frame through the contact zone and measures both the entry angle and the duration the barrel stays within the pitch plane window. The system compares barrel path shape across fastball and off-speed reps to identify whether the hitter is adjusting their path based on pitch type or swinging with the same shape regardless of what is thrown.
Related terms
- Angle d’attaque (frappe) (attack angle)L’angle d’attaque à la frappe est l’angle vertical de la trajectoire de la batte à travers la zone de frappe. Un angle d’attaque légèrement ascendant (+5° à +15°) épouse le plan du lancer pour un contact dur.
- Trajectoire des mains (hand path)La trajectoire des mains est la route que les mains parcourent de la position de lancement au contact — une trajectoire efficace et directe vers la balle garde le barrel dans la zone plus longtemps et prévient le casting (jeter le barrel vers l’extérieur).
- Frappe rotative (rotational hitting)La frappe rotative est un modèle de swing où la puissance vient principalement de la rotation des hanches et du tronc plutôt que du transfert de poids du corps vers l’avant — c’est le modèle de puissance dominant dans le baseball moderne.
- Extension au contact (extension at contact)L’extension au contact signifie que les bras sont presque complètement étendus à travers la zone de frappe, maximisant la longueur de levier du swing et transférant le plus d’énergie dans la balle.
- Vitesse de sortie (exit velocity, EV)La vitesse de sortie est la vitesse à laquelle la balle quitte la batte, en mph. C’est une métrique de plafond : plus vous frappez fort, plus la balle peut aller loin.
- Barrel (balle frappée optimale)Un barrel est une balle frappée combinant simultanément une vitesse de sortie élevée et un angle de lancement optimal — la combinaison exacte la plus susceptible de produire des coups de plusieurs buts.
Related guides & benchmarks
Put this into your swing
SwingVantage can spot this in your own swing — free to start.
See a sample Baseball report first