Skip to main content

Traduction automatique. L’anglais fait référence ; nous affinerons la formulation au fil du temps. Une suggestion ? Dites-le-nous.

Intermediate

Inclinaison du manche

Also known as: inclinaison vers l’avant, mains devant

Definition

L’inclinaison du manche, c’est quand l’extrémité du grip est devant la tête du club à l’impact — les mains devant la balle. Elle réduit le loft dynamique, comprime la balle et est la signature d’un bon contact de fer.

L’inclinaison du manche désigne l’angle vers l’avant du manche du club à l’impact — la position où le grip du club est plus proche de la cible que la tête. Vu de face, un golfeur avec une inclinaison positive montre le manche s’inclinant vers la cible depuis la tête du club jusqu’aux mains, plutôt qu’à la verticale ou incliné vers l’arrière. L’inclinaison du manche à l’impact est l’indicateur de position le plus important de la qualité de frappe : elle est à la fois la cause d’une compression efficace de la balle et le résultat visible du maintien du lag jusqu’à la zone d’impact.

Le mécanisme de l’inclinaison du manche est simple : quand le grip mène la tête du club vers la balle, le loft effectif du club est réduit (la face est fermée) et la frappe est descendante plutôt qu’ascendante. Cette combinaison produit une compression maximale — la balle est écrasée entre la face et le sol —, générant le "clic" caractéristique d’une frappe de fer propre et le vol pénétrant d’un coup bien exécuté. Un fer 7 de 34° de loft frappé avec 4° d’inclinaison délivre environ 30° de loft effectif. Le même club frappé avec le manche incliné vers l’arrière délivre 38° ou plus, produisant un vol haut, doux et faible.

L’inclinaison du manche est une conséquence plus qu’une cause. Un golfeur ne peut pas "créer" l’inclinaison indépendamment en poussant manuellement les mains vers l’avant à l’impact ; cela produit une sensation "bloquée" ou "coincée" et donne en général un push ou un hook. L’inclinaison apparaît plutôt naturellement quand le lag est maintenu et que le bas du corps mène la descente — les mains arrivent naturellement à la balle devant la tête du club quand le séquencement est correct. Apprendre aux golfeurs à se concentrer directement sur l’inclinaison à l’impact sans traiter les causes en amont ne produit en général qu’une amélioration temporaire.

Beginner tip

A reliable training check. This means after hitting a ball, look at your divot. This means if the divot starts at the ball or just ahead of it, you are achieving shaft lean and hitting the ball first. If the divot starts before the ball (fat) or there is no divot, your shaft is leaning backward and you are flipping.

Advanced note

Use a training aid or alignment stick angled at 45° toward the target in front of the ball during practice swings. This means at impact, your hands should clear the stick (pass it) before the clubhead arrives, confirming positive shaft lean. This visual reference gives real-time confirmation of handle-leading-head delivery.

Example

Un joueur qui voit ses mains mener la tête du club de 10-15 cm au moment de l’impact obtient une inclinaison du manche vers l’avant et comprime la balle.

How it shows up on video

From a face-on camera angle, shaft lean at impact is directly visible as the angle of the club shaft relative to vertical. This means positive shaft lean shows the grip end of the shaft closer to the target than the clubhead. This produces a clear forward lean. The hands should appear to be at or past the ball when viewed from face-on. Zero shaft lean appears as a vertical shaft at impact. Negative shaft lean (the shaft leaning backward, toward the golfer) indicates a flip or scoop and is a significant fault. Degree of lean is easier to see with metal-shafted clubs against a clean background or with video at 120fps or faster.

Common mistakes

  • Deliberately pushing the hands forward to create shaft lean. This means manually thrusting the hands leads to blocked shots and produces a fake shaft lean that does not carry the energy benefit of genuine lag release. True shaft lean must arise from lag and sequencing.
  • Confusing setup shaft lean with impact shaft lean. This means some golfers set up with their hands slightly forward (a forward press). This creates shaft lean at address. This is useful, but it does not guarantee shaft lean at impact; that still depends on what happens during the swing.
  • Using shaft lean as a diagnostic for different shot types without adjusting. This means a driver struck on the upswing correctly shows no shaft lean or slightly negative lean. Using positive shaft lean as a universal standard and applying it to all clubs will cause topped, thin shots with the driver.
  • Trying to maintain shaft lean too long through impact. This means forward shaft lean is correct at impact but the club should release naturally after the ball is struck. Golfers who try to maintain the lean through the entire follow-through create tension and reduce speed.

In SwingVantage Motion Lab

SwingVantage can clearly observe shaft lean from face-on video by analyzing the angle of the visible club shaft relative to vertical at the moment of impact. This is one of the more reliably detectable swing traits because the angle is visible even in standard-resolution video from a properly positioned face-on camera. The system notes whether the lean is positive (forward), neutral, or negative (backward/scoop).

Related guides & benchmarks

Put this into your swing

SwingVantage can spot this in your own swing — free to start.

See a sample Golf report first