OPS+ (Adjusted OPS)
Also known as: OPS plus, adjusted OPS, what is OPS+, adjusted on-base plus slugging
OPS+ compares a hitter's on-base plus slugging with the league, adjusted for ballpark. 100 is league average, and 150 is 50% better than average.
OPS+ puts OPS on a scale where 100 is average. MLB's glossary gives the base formula as 100 × (OBP ÷ league OBP + SLG ÷ league SLG − 1). Baseball-Reference also divides by a park factor in its published version. That stops a hitter in a hitter-friendly park from looking better than they are.
The formula is not just OPS divided by league OPS. Each part is first compared with its own league average. MLB's glossary gives an example. Miguel Cabrera's .895 OPS in 2014 was 50% better than average after the adjustments, so his OPS+ was 150.
OPS+ is easy to read and widely published. It shares one weakness with OPS. FanGraphs notes that OPS treats on-base percentage as equal to slugging, while OBP is roughly twice as important for scoring runs. MLB adds that OPS+ and wRC+ usually look very similar for the same hitter and season.
Tips by skill level
Read OPS+ like a grade where 100 is average. Over 100 is above average, and under 100 is below.
Example
A shortstop posts a .750 OPS in a league where hitting is low. After adjustment, his OPS+ is 115. He was 15% better than a league-average hitter.
Why it matters
Raw OPS rises and falls with the league and the ballpark. OPS+ removes much of that so hitters can be compared fairly.
Common mistakes
- Calculating OPS+ as player OPS divided by league OPS.
- Treating OPS+ as including defense or baserunning.
- Forgetting that the park adjustment can move a hitter's number a lot.
Frequently asked questions
How is OPS+ calculated?
100 × (OBP ÷ league OBP + SLG ÷ league SLG − 1), with a park adjustment. Baseball-Reference divides that by its batting park factor.
What is a good OPS+?
100 is league average. MLB's glossary uses 150 as an example of a hitter 50% better than average.
Sources
Related terms
- On-Base Plus Slugging (OPS)OPS is a hitting stat that adds on-base percentage and slugging percentage. It combines reaching base and hitting for power in one number.
- Weighted Runs Created Plus (wRC+)WRC+ measures a hitter's total offense against league average, adjusted for ballpark and league. 100 is average, and each point above or below is one percent better or worse.
- Park FactorA park factor shows how much a ballpark boosts or holds down scoring compared with an average park. On FanGraphs, 100 is average and a higher number means more offense.
- On-Base Percentage (OBP)On-base percentage (OBP) shows how often a batter reaches base. Add hits, walks and hit-by-pitches, then divide by at-bats, walks, hit-by-pitches and sacrifice flies.
- Slugging PercentageSlugging percentage is total bases divided by at-bats. A single counts one base, a double two, a triple three and a home run four. It measures how much damage a hitter does per at-bat. Walks and hit-by-pitches are not counted.
Available in other languages
Related guides & benchmarks
Work on the cause
Video shows how you move, not the ball itself. Film one swing to find the movement behind this result — free to start.
See a sample Baseball report first