Grip Rules (Shape, Size and Reminder Ribs)
Also known as: grip rules, legal golf grip, reminder grip, ribbed grip, reminder rib, conforming grip, maximum grip size rule
Under the Equipment Rules, a grip on any club except a putter must be round in cross-section, apart from an optional slight reminder rib. No grip may measure more than 1.75 inches (44.45 mm) across in any direction.
Part 2, Section 3 of the Equipment Rules covers the grip. The grip must be fixed to the shaft and be straight and plain in form. For clubs other than putters, it must be circular in cross-section. The one exception is a continuous, straight, slightly raised rib along its length. Golfers call these reminder grips, because the rib helps the hands find the same place each time.
Size limits apply to every club. The grip must not measure more than 1.75 inches (44.45 mm) in any direction. It may taper, but it must not bulge out or narrow in along its length. Woods and irons may have only one grip.
Putters have more freedom. A putter grip may be non-circular, provided it has no hollows, is symmetrical and stays generally similar along its length. That is why flat-fronted putter grips are allowed. A putter may also have two separate grips. Each must then be circular, and they must sit at least 1.5 inches (38.1 mm) apart. Build-up tape changes size within these limits, so a fitted oversize grip is fine.
Tips by skill level
Choose grips by size and feel first. Any standard round or ribbed grip from a golf shop is built for the rules.
If you want a ribbed grip, ask the fitter to set the rib straight down the back of the shaft so your face position stays consistent.
Example
A golfer fits ribbed grips to her irons so her hands sit the same way on every shot. The rib is straight and runs the full length of the grip, so the grips conform.
Why it matters
Most shop grips already conform. Knowing the rules helps if you try homemade build-ups, moulded grips or unusual training grips.
Common mistakes
- Fitting a training grip moulded for the fingers on a club you use in competition.
- Assuming a flat-fronted putter grip is allowed on an iron, when only putters may have non-circular grips.
- Installing a reminder grip with the rib twisted off line, which changes how the face sits in your hands.
Frequently asked questions
Are ribbed golf grips legal?
Yes. Part 2, Section 3 allows a continuous, straight, slightly raised rib on the grip of a wood or iron.
What is the biggest grip allowed in golf?
No grip may measure more than 1.75 inches (44.45 mm) in any direction.
Can a putter have two grips?
Yes, if each grip is circular and they are at least 1.5 inches (38.1 mm) apart. Woods and irons may have only one grip.
Sources
Related terms
- Grip SizeGrip size is fit to hand size, from undersize to oversize. A slightly larger grip can also quiet an overactive release by reducing hand action through impact.
- RegrippingRegripping replaces worn grips, usually every 40 to 80 rounds or yearly for regular players. It restores the traction and feel that fade as rubber hardens.
- Putter Grip Shapes (Pistol, Paddle and Oversize)Putter grips come in shapes such as pistol, paddle and oversize. They can have a flat front because the Equipment Rules let putter grips be non-circular, which other clubs' grips cannot be.
- Is My Driver Legal? (Conforming Clubs)Your driver is legal if it conforms to the Equipment Rules, and an unaltered driver from a major brand is normally designed to. Under Rule 4.1a, a stroke with a non-conforming club means disqualification. Normal wear does not make a club non-conforming.
- GripThe grip is how your hands hold the club. It is the only contact you have with the club, so it controls the clubface more than any other fundamental.
Available in other languages
Related guides & benchmarks
Ready to work on your own swing?
This term is background, not something video measures. Film one swing to find the one thing to work on first — free to start.