Skip to main content
Skip to main content
Intermediate

Plumber's Neck (Putter Hosel)

Also known as: plumber's neck, plumbers neck putter, plumber's neck hosel, plumbers neck hosel, bent neck putter

Definition

A plumber's neck is a putter hosel shaped like a bent pipe joint. It joins the shaft to the heel and sets the shaft slightly ahead of the face, which gives offset.

The neck, or hosel, is the part that joins a putter's shaft to its head. A plumber's neck rises from near the heel, steps toward the target and then turns up into the shaft. The shape looks like a short length of bent water pipe, which gives it its name. It is common on classic blade putters and on some mallets.

The bend does two things. It places the shaft a little ahead of the face, called offset. Many golfers find that helps their hands sit slightly ahead of the ball. It also affects how the head hangs. Putters with this neck often show some toe hang when balanced on a finger. That tends to suit strokes with a gentle arc rather than a straight one.

The Equipment Rules allow necks like this. Part 2, Section 2c says a neck must only connect the shaft to the head in a traditional way. Its length from top to sole must not exceed 5 inches (127 mm).

Tips by skill level

Beginner tip

Balance the putter on your finger. If the toe points down, it has toe hang and may suit a stroke with some arc.

Advanced note

Compare offset with your hand position at impact. More offset can feel natural if you press forward, and less if you keep the shaft upright.

Example

A golfer who likes a blade putter wants her hands a little ahead at address. She picks a model with a plumber's neck, and the offset helps her set up the same way each time.

Why it matters

The neck changes offset and balance, and both affect how a putter suits your stroke. It is one of the main choices in putter design.

Common mistakes

  • Choosing a neck style by looks without checking how the putter hangs.
  • Pairing a toe-hang plumber's neck with a very straight stroke without testing it.
  • Assuming every plumber's neck has the same offset and toe hang.

Frequently asked questions

What is a plumber's neck on a putter?

A hosel shaped like a bent pipe that joins the shaft to the heel and places the shaft a little ahead of the face.

Does a plumber's neck putter have toe hang?

Many do, which tends to suit a stroke with some arc. Balance the putter on your finger to check.

Sources

Still have a question about Plumber's Neck (Putter Hosel)? Ask SwingVantage

Related guides & benchmarks

Ready to work on your own swing?

This term is background, not something video measures. Film one swing to find the one thing to work on first — free to start.