Putter Face Insert
Also known as: putter insert, putter face insert, insert putter, milled putter face, putter face material, grooved putter face
A putter face insert is a separate piece of material set into the face, such as a polymer or a softer metal. It changes the feel and sound of the strike, and some designs aim to change how the ball starts rolling.
A putter face can be solid metal or carry an insert. Solid faces are often milled, which leaves a fine pattern on the surface. Insert faces use a different material in the strike area, such as a polymer or a soft metal. Some inserts have grooves or patterns.
The main effect golfers notice is feel and sound. A soft insert usually feels and sounds quieter. A firm metal face sounds clicky and can feel more solid. Many golfers judge speed partly by sound, so a new face can take time to adjust to. Some makers say grooved inserts help the ball start rolling sooner. Judge that claim by your own testing.
The Equipment Rules limit putter faces. Under Part 2, Section 5a, a putter face must be no less than 85 on a Shore A durometer, a hardness scale. So very soft materials are not allowed. The face also must not put significantly more or less spin on the ball than a standard steel face, with some exceptions for putters.
Tips by skill level
Hit a few putts with a soft insert and a firm face. Pick the one whose feel matches the distance the ball actually goes.
When testing faces, putt to fixed distances without looking up. Choose the face that gives you the tightest distance spread.
Example
A golfer leaves many putts short with his soft-insert putter. He tries a milled steel face that sounds louder, and he finds his speed control improves on fast greens.
Why it matters
Feel and sound affect distance control on the greens. The face material is one of the easiest putter features to test.
Common mistakes
- Choosing a putter by look without hitting putts to hear and feel the face.
- Expecting a grooved insert to fix a poor stroke.
- Switching between soft and firm faces often, which can upset your speed control.
Frequently asked questions
Are insert putters better than milled putters?
Neither is better for everyone. Inserts usually feel softer, and milled faces usually feel firmer. Choose the one that helps your speed control.
Is there a rule on how soft a putter face can be?
Yes. Part 2, Section 5a of the Equipment Rules says a putter face must be no less than 85 on a Shore A durometer.
Sources
Related terms
- Blade PutterA blade putter has a slim, classic head with less perimeter weighting than a mallet, and it is more often toe-hang balanced. That design suits golfers with a natural arcing stroke who prefer feel and feedback.
- Mallet PutterA mallet putter has a large, often geometric head weighted toward its edges for forgiveness. Many are face-balanced to suit a straighter stroke.
- Putt Skid and Forward RollYour putt skids because the ball leaves the face sliding instead of rolling. Every putt skids a little, but too much skid or a hop comes from the wrong loft at impact. Hitting down with too much shaft lean or flipping the hands both cause it. Strike the ball at the bottom of the stroke with the shaft near vertical.
- Putter FittingPutter fitting matches a putter's length, lie angle, loft, and balance style to a golfer's actual stroke path, using putting-specific measuring tools.
- Speed Control (Putting)Speed control is calibrating stroke length and tempo so a putt rolls the intended distance. It is widely considered the single most important putting skill.
Available in other languages
Related guides & benchmarks
Ready to work on your own swing?
This term is background, not something video measures. Film one swing to find the one thing to work on first — free to start.