Verticutting (Vertical Mowing)
Also known as: verticutting, vertical mowing, verti-cutting greens, dethatching, scarifying turf
Verticutting, or vertical mowing, uses spinning blades that slice down into the turf to pull out thatch, the layer of dead stems and roots under the grass. It thins the turf and removes dead material.
Thatch is a layer of dead plant material that builds up between the green blades and the soil. NC State Extension notes that vertical mowing is useful for removing thatch in bermudagrass. A verticutter, sometimes called a power rake, has blades set upright. They slice down into the turf instead of cutting across the top like a normal mower.
NC State's guidance for bermudagrass sports fields suggests verticutting about two to three weeks after the grass turns green in spring. It recommends two passes, the second at right angles to the first. The same guide advises against verticutting in autumn unless you plan to overseed.
Timing also matters for weeds. NC State warns that dethatching during the main germination periods of Poa annua can help that weed spread. That is one reason greenkeeping teams plan this work carefully.
Tips by skill level
If you see thin lines and clippings across a green or fairway, it may have been verticut. Ask the pro shop how it is playing.
Ask about the course's maintenance calendar. Knowing when verticutting and aeration happen helps you time important rounds.
Example
A greenkeeper runs a verticutter across a bermudagrass area in two directions, the second pass at right angles to the first. The machine pulls up strips of dead material, which the crew then clears away.
Why it matters
Knowing about verticutting explains the fresh lines and debris you may see after course maintenance. It also explains why some areas play a little differently for a short time.
Common mistakes
- Confusing verticutting with ordinary mowing
- Thinking verticutting and core aeration are the same job
- Assuming any time of year suits this work
Frequently asked questions
What is verticutting on a golf course?
It is vertical mowing with blades that slice down into the turf to remove thatch, the layer of dead material under the grass.
Sources
Related terms
- Core Aeration (Hollow Tining)Core aeration, also called aerification or hollow tining, uses a machine to push hollow tines into the turf and pull out small plugs of soil. It relieves compaction and lets air and water reach the roots, but leaves greens bumpy for a while.
- Bermudagrass (Golf Turf)Bermudagrass is a tough, warm-season grass used on golf fairways and tees, and on many greens in hot climates. It handles heat, drought and wear well, but turns brown and dormant in cold weather and does poorly in shade.
- Poa Annua (Annual Bluegrass)Poa annua, or annual bluegrass, is a light green grass that invades many golf greens, especially bentgrass greens. It can produce seedheads even when mown very short, and some types live for years on greens.
- Grain (Putting Greens)Grain is the direction the grass blades lean on a putting green. Putts rolling with the grain run faster and putts into it run slower, and grain can nudge the ball sideways too. It matters most on Bermuda grass greens and much less on bentgrass, where the blades grow nearly straight up.
- Overseeding (Golf Course)Overseeding is sowing a second grass into existing turf. On warm-climate courses, it usually means sowing ryegrass or rough bluegrass into dormant bermudagrass in autumn, so the course stays green through winter.
Available in other languages
Related guides & benchmarks
Ready to work on your own swing?
This term is background, not something video measures. Film one swing to find the one thing to work on first — free to start.