Skip to main content

자동 번역입니다. 영어 버전이 기준이며, 표현은 점차 다듬어 나갈 예정입니다. 개선할 부분을 발견하셨나요? 알려주세요.

Advanced

백도어 라이즈

Definition

백도어 라이즈볼은 플레이트 바깥쪽 가장자리로 던져져 코너를 벗어난 것처럼 보이지만 후반 회전이 다시 스트라이크존 안으로 끌어들여, 그것을 보내는 타자를 속이는 투구다.

존의 중심을 통과하며 상승하는 대신, 백도어 라이즈는 바깥쪽 코너나 그 너머로 향하는 각도로 릴리스되며, 각진 릴리스 라인과 살짝 기울어진 커팅 스핀 축이 점진적으로 그것을 다시 가장자리 위로 끌어들인다. 바깥쪽으로 읽고 참는 타자들은 지켜보다 당한다. 이는 정밀한 릴리스 포인트 컨트롤을 요구하는 고급 로케이션 변형이며, 타자들이 가까운 투구를 참도록 훈련된 0-0이나 1-0 카운트에서 특히 효과적이다.

Beginner tip

Develop a reliable standard rise ball first. The backdoor variant requires the same backspin mechanics but a release angle pointed a few inches outside the plate.

Advanced note

Deploy the backdoor rise in 0-0 or 1-0 counts when hitters are taking pitches, exploiting their patience by making them look off a pitch that will back-door the outer edge for a called strike.

Example

타자는 플레이트에서 6인치 벗어난 것처럼 보이는 투구를 참지만, 심판은 공이 바깥쪽 코너 위로 다시 돌아왔다며 스트라이크 아웃을 선언한다.

How it shows up on video

From the hitter's perspective the ball will start outside the plate edge and slowly drift back toward it rather than moving in a straight rising line through the zone. The hitter will often begin pulling their head out — reading the pitch as a ball — then freeze when the umpire calls the strike. In side-view footage you can see the ball's path curling back over the corner rather than cutting straight across.

Common mistakes

  • Over-correcting the release angle so the ball starts too far outside and never returns to the zone
  • Using it on 2-0 or 3-1 counts when hitters are aggressive and will chase any pitch near the zone
  • Failing to set it up with a rise ball through the zone so hitters have no frame of reference for the backdoor variant
  • Hitters failing to identify the gradual curve back and laying off a borderline pitch that catches the outside corner

In SwingVantage Motion Lab

Motion Lab maps ball trajectory angle relative to the strike zone boundary to confirm the backdoor path and measure how far off the edge the release must start for the pitch to return to the corner.

Frequently asked questions

백도어 라이즈는 표준 라이즈볼과 어떻게 다른가요?

표준 라이즈는 존의 중앙이나 안쪽 부분을 가로지릅니다. 백도어 라이즈는 존 바깥쪽을 겨냥해 바깥쪽 가장자리를 가로질러 다시 휘어집니다.

왜 백도어 라이즈는 경험 많은 타자들도 속이나요?

타자들은 투구 궤적을 일찍 읽도록 배우고 백도어 라이즈는 바깥쪽 볼처럼 보이기 때문입니다 — 훈련된 본능은 참으라고 말하지만, 그것은 코너를 가로지릅니다.

Still have a question about 백도어 라이즈? Ask SwingVantage

Related guides & benchmarks

Put this into your swing

SwingVantage can spot this in your own swing — free to start.

See a sample Fast-Pitch Softball report first