Skip to main content

Traducción automática. El inglés es la versión de referencia; iremos puliendo la redacción. ¿Ves algo que mejorar? Cuéntanoslo.

Beginner

Mecánica del toque

Definition

La mecánica del toque se refiere a la técnica de agarre, postura y ángulo del bate usada para amortiguar una bola lanzada y dirigirla a una zona concreta del infield, ya sea para un sacrificio o para un hit.

Un toque adecuado usa la mano superior deslizada hacia arriba por el barril para el control, el bate angulado a unos 45 grados y el cuerpo girado para mirar a la lanzadora. La bateadora "atrapa" la bola con el bate en lugar de empujarla, absorbiendo la fuerza para amortiguarla. El ángulo del bate dirige la bola: más plano la envía a tercera, más pronunciado la envía a primera. Las buenas tocadoras también pueden tocar strikes y dejar pasar bolas: la disciplina es tan importante como la técnica. En el fast-pitch, tocar contra una rise ball requiere mantener el ángulo del bate nivelado para evitar elevar la bola.

Beginner tip

Think "catch the ball with the bat" rather than "hit the ball with the bat". This means your job is to absorb the pitch's energy, not to add your own.

Advanced note

Practice angle-specific bunting by placing targets at first-base line and third-base line locations and reliably directing the ball to each target using only bat angle adjustment, not push direction.

Example

La bateadora cuadra temprano, desliza su mano superior hacia el barril, angula hacia primera y amortigua el lanzamiento por la línea de primera base con una atrapada suave de la bola en el bate.

How it shows up on video

Watch the top hand position on the barrel. This means it should be near or above the label, not down at the grip. This means and the bat angle should be set before the ball arrives rather than after commitment. Poor bunters will show a pushing motion toward the ball rather than a catching/absorbing motion, producing hard bunt contact that travels too far. The bat angle relative to fair territory at the moment of contact directly predicts the direction the ball will travel.

Common mistakes

  • Pushing the bat at the ball rather than letting the ball come to the bat and absorbing its force to deaden the contact
  • Setting the bat angle too late. This means squaring and angling after the pitch is already halfway to the plate. This means giving the defense time to react and charge
  • Bunting balls out of the zone on pitch sequences that require zone discipline, especially rise balls above the zone that produce automatic pop-ups when bunted
  • Using a full grip with the bottom hand rather than sliding the top hand for control. This reduces the ability to angle and deaden the ball accurately

In SwingVantage Motion Lab

Motion Lab analyzes bat angle at contact and hand position on the barrel to confirm proper bunting form and measures how far the bunted ball travels relative to optimal placement zones for each bunt type.

Frequently asked questions

¿Por qué tocar una rise ball produce un elevado?

Porque el backspin de la rise ball combinado con el ángulo de bate ascendente necesario para conectar un lanzamiento por encima de la zona envía la bola bruscamente hacia arriba: las tocadoras solo deberían tocar rise balls a la altura del cinturón o por debajo.

¿Cuándo no deberías tocar?

Cuando la bateadora está en una cuenta a favor de la bateadora (3-1, 2-0), cuando la lanzadora está lanzando rise balls por encima de la zona, o cuando la defensa ya está en un shift de anticipación de toque y fildeará con facilidad cualquier bola en juego.

Related guides & benchmarks

Put this into your swing

SwingVantage can spot this in your own swing — free to start.

See a sample Fast-Pitch Softball report first