번팅 메커닉스
번팅 메커닉스는 던져진 공을 죽이고 인필드의 특정 구역으로 지시하기 위해 사용되는 그립, 스탠스, 배트 각도 기술을 말한다 — 희생번트든 안타를 위한 것이든.
제대로 된 번트는 통제를 위해 배럴 위로 슬라이드된 위쪽 손, 대략 45도로 각진 배트, 투수를 향해 돌아선 몸을 사용한다. 타자는 공을 밀어내는 대신 배트로 공을 "잡는다", 힘을 흡수해 공을 죽인다. 배트 각도가 공을 지시한다: 더 평평하면 3루로, 더 가파르면 1루로 보낸다. 좋은 번터들은 스트라이크는 번트하고 볼은 참을 수도 있다 — 규율이 기술만큼 중요하다. 패스트피치에서는, 라이즈볼에 대한 번팅이 공을 팝업시키지 않도록 배트 각도를 레벨로 유지할 것을 요구한다.
Think "catch the ball with the bat" rather than "hit the ball with the bat". This means your job is to absorb the pitch's energy, not to add your own.
Practice angle-specific bunting by placing targets at first-base line and third-base line locations and reliably directing the ball to each target using only bat angle adjustment, not push direction.
Example
타자는 일찍 스퀘어하고, 위쪽 손을 배럴로 슬라이드하며, 1루 쪽으로 각도를 잡고, 배트 위 공의 부드러운 캐치로 1루선을 따라 투구를 죽인다.
How it shows up on video
Watch the top hand position on the barrel. This means it should be near or above the label, not down at the grip. This means and the bat angle should be set before the ball arrives rather than after commitment. Poor bunters will show a pushing motion toward the ball rather than a catching/absorbing motion, producing hard bunt contact that travels too far. The bat angle relative to fair territory at the moment of contact directly predicts the direction the ball will travel.
Common mistakes
- Pushing the bat at the ball rather than letting the ball come to the bat and absorbing its force to deaden the contact
- Setting the bat angle too late. This means squaring and angling after the pitch is already halfway to the plate. This means giving the defense time to react and charge
- Bunting balls out of the zone on pitch sequences that require zone discipline, especially rise balls above the zone that produce automatic pop-ups when bunted
- Using a full grip with the bottom hand rather than sliding the top hand for control. This reduces the ability to angle and deaden the ball accurately
In SwingVantage Motion Lab
Motion Lab analyzes bat angle at contact and hand position on the barrel to confirm proper bunting form and measures how far the bunted ball travels relative to optimal placement zones for each bunt type.
Frequently asked questions
왜 라이즈볼을 번트하면 팝업이 만들어지나요?
라이즈볼의 백스핀이 존 위 투구에 컨택트하는 데 필요한 상승하는 배트 각도와 결합되어 공을 날카롭게 위로 보내기 때문입니다 — 번터들은 벨트 높이나 그 아래의 라이즈볼만 번트해야 합니다.
언제 번트하지 말아야 하나요?
타자가 히터스 카운트(3-1, 2-0)에 있을 때, 투수가 존 위로 라이즈볼을 던지고 있을 때, 또는 수비가 이미 번트 예상 시프트에 있어 인플레이된 어떤 공이든 쉽게 처리할 때입니다.
Related terms
Related guides & benchmarks
Put this into your swing
SwingVantage can spot this in your own swing — free to start.
See a sample Fast-Pitch Softball report first