Pro Side and Amateur Side (Putting)
Also known as: pro side, amateur side, pro side of the hole, amateur side of the hole, missing on the low side, high side of the hole, low side of the hole, under-reading a putt
On a breaking putt, the pro side is the high side of the hole and the amateur side is the low side. A putt that misses low never had a chance to fall, while one that misses high could still have dropped.
Every breaking putt curves downhill. If it rolls above the hole, it is on the high side, also called the pro side. If it finishes below the hole, it missed on the low side, the amateur side. The names reflect a common view that club golfers tend to under-read break. Their putts fall away below the hole before they get there.
A putt on the high side is still moving toward the hole as it curves down. If the speed is right, it can catch the edge and drop. A putt on the low side has already curved away on the wrong side. It cannot fall, however good the speed. That is why many coaches suggest that when you are unsure, you play a touch more break, not less.
Missing high is not a goal in itself. A putt rolled far above the hole misses just as surely. The idea is about which way to lean when you are unsure of a read. It also helps you learn from your misses. A string of low-side misses usually means you are under-reading the break. It can also mean you are hitting putts softer than planned, so they take more break than you read.
Tips by skill level
On breaking putts, pick a start line that feels like slightly too much break. Then roll the ball at the speed you planned.
Note high and low misses for a few rounds. A steady low-side pattern tells you to add break or to check that your speed matches your read.
Example
A golfer faces a 12-foot putt that breaks from left to right. He plays a ball's width of break, but the putt dies below the hole. On a similar putt two holes later he plays twice as much break, and the ball catches the high edge and drops.
Why it matters
Only a putt on the high side can still fall. Leaning toward more break when you are unsure gives more putts a chance.
Common mistakes
- Aiming at the edge of the hole on a putt that breaks more than a cup's width.
- Rolling a breaking putt too softly, so it falls below the hole.
- Over-correcting after a low miss and playing far too much break.
- Treating every miss the same instead of noting which side it missed on.
Frequently asked questions
What does it mean to miss on the amateur side?
It means a breaking putt finished below the hole. The ball curved away before it reached the hole, so it never had a chance to drop.
Is it better to miss putts on the high side?
When you are unsure of the read, many coaches suggest erring high. A putt above the hole can still fall, but one below it cannot.
Related terms
- Reading BreakReading break is predicting how much, and which way, a putt will curve based on slope. It is a separate skill from the putting stroke: a well-struck putt on a misread line still misses.
- Green ReadingGreen reading is judging a green's slope, grain, and speed. The goal is to predict how much, and which way, a putt will curve from its starting line.
- Aim PointAim point reads greens by feel instead of by eye. The feet sense the slope percentage, and that number becomes a finger-count aim spot near the hole.
- Speed Control (Putting)Speed control is calibrating stroke length and tempo so a putt rolls the intended distance. It is widely considered the single most important putting skill.
- Apex of a Putt (Break Point)The apex of a breaking putt is the point on its curve that sits farthest from a straight line to the hole. Many golfers aim at it, but the ball must start above the apex to reach it.
- Die Speed vs Firm Speed (Putting)Die speed means rolling a putt so it just reaches the hole and drops over the front edge. Firm speed means hitting it hard enough to finish well past if it misses. Each speed needs a different line.
Available in other languages
Related guides & benchmarks
Ready to work on your own swing?
This term is background, not something video measures. Film one swing to find the one thing to work on first — free to start.