땅볼 비율
Also known as: GB%, 그라운더 비율
땅볼 비율(GB%)은 타구 중 땅볼의 비율로, 파워 타자에게는 대체로 부정적인 지표지만 컨택트형 타자는 전략적으로 활용할 수 있다.
땅볼은 발사각이 0도 미만(음의 각도)일 때 발생한다. 외야까지 도달하는 경우가 드물며 기대 타율 기준으로 가장 가치가 낮은 타구 유형에 속한다. 타자의 높은 땅볼 비율은 대체로 가파르거나 아래로 도는 배럴 패스, 롤오버 경향, 혹은 늦은 pitch 인식으로 인한 당겨친 약한 컨택트를 시사한다. 넓은 구장의 최상급 컨택트 타자는 내야수 사이 갭을 의도적으로 노릴 수 있지만, 대부분의 타자에게 높은 GB%는 경로 결함의 신호다. 프로 평균 땅볼 비율은 약 44%이며, 40% 미만은 파워 타자에게 좋은 프로파일로 여겨진다.
땅볼 비율은 집계 수치 이상의 방향성 정보를 담고 있다. 당김 쪽 땅볼이 높게 집중되면 롤오버를 시사한다. 배럴이 늦게 도착해 공 안쪽을 아래로 감싸며 도는 것이다. 가운데와 반대쪽 필드 방향 땅볼이 높게 집중되면 지나치게 평평하거나 이른 배럴 패스를 시사한다. 컨택트 지점이 지나치게 앞쪽이고, 배럴이 최적의 어택 앵글에 도달하기 전에 도착하는 것이다. 땅볼의 방향 분포를 파악하면 모든 땅볼을 같은 문제로 취급하는 대신 구체적인 메커닉 원인을 진단할 수 있다.
모든 땅볼 비율이 메커닉적으로 동일하지는 않다. 패스트볼에서는 45% 땅볼 비율, 변화구에서는 32%인 타자는 경로 문제가 아니라 패스트볼에서의 타이밍 관련 결함을 가진 것이다. 구종 전반에 걸쳐 꾸준히 높은 GB%를 가진 타자는 체계적인 배럴 패스나 롤오버 문제를 가진 것이다. GB%를 구종과 위치별로 세분화하는 것이 메커닉 진단을 설명적 통계에서 실행 가능한 인사이트로 바꾸는 방법이다.
If you are hitting too many grounders, start by identifying where they go. This means consistent pull-side grounders mean focus on timing and letting the ball travel deeper. Consistent opposite-field grounders mean focus on staying through the ball rather than around it.
Map your GB% by pitch type and location in your SwingVantage data. This means if it spikes on specific pitch heights or velocities, you have timing-specific ground ball causes that can be addressed with targeted timing adjustment rather than global swing mechanics changes.
Example
그의 땅볼 비율 51%는 영상에서 확인된 윗손 롤오버 문제를 가리켰다. 그의 배럴은 평균 8도 하강 각도로 도착하고 있었다.
How it shows up on video
On video, ground ball mechanics are visible in the barrel's downward angle at contact. This means a barrel arriving more than 15 degrees below horizontal is almost guaranteed to produce either a pull-side grounder or a rollover. Common error signatures include the barrel visibly drooping below the hands at contact, the back shoulder finishing well below the front shoulder (indicating a downward barrel plane). A follow-through that finishes low rather than wrapping up and over the front shoulder.
Common mistakes
- Chopping down at the ball in a "swing down for topspin" approach that produces grounders rather than the desired backspin-driven line drives the approach is intended to create
- Combining a rollover tendency on inside pitches with an attempt to go opposite field on outside pitches using the same swing pattern. This means different causes require different fixes, and using one cue for both produces uneven results
- Attributing all grounders to timing without checking pitch direction. This means pull-side grounders on pitches away indicate a timing cause. Opposite-field grounders on inside pitches indicate a barrel path cause
- Using infield defensive shifting as evidence that a high GB% is intentional contact quality when it actually reflects a mechanical pattern that should be corrected
In SwingVantage Motion Lab
SwingVantage plots ground ball direction and launch angle data alongside barrel path angle at contact. This allows direct correlation between the mechanical cause (barrel approach angle) and the batted ball outcome (grounder to which field). The directional ground ball map is one of the most actionable diagnostic outputs in the hitting analysis. This means it converts a statistics problem into a specific location on the diamond where the fix needs to be applied.
Related terms
- 롤오버롤오버는 윗손이 너무 일찍 아랫손 위로 돌아가는 스윙 결함으로, 컨택트 시 배럴이 닫히며 당겨치는 쪽으로 약한 땅볼을 만들어낸다.
- 라인드라이브 비율라인드라이브 비율(LD%)은 라인드라이브로 분류되는 타구(대체로 발사각 0~25도에 강한 컨택트)의 비율로, 모든 타구 유형 중 기대 타율이 가장 높다.
- 발사각 (타격)타격에서 발사각은 공이 배트를 떠나는 수직 각도다. 대략 10~25°가 가장 강하고 생산적인 컨택트를 만들어낸다.
- 어택 앵글 (타격)타격에서 어택 앵글은 히팅존을 통과하는 배트 경로의 수직 각도다. 살짝 위쪽을 향하는 어택 앵글(+5°~+15°)이 강한 컨택트를 위해 투구 플레인과 맞아떨어진다.
- 배럴 패스배럴 패스는 배트의 배럴이 타격존을 통과하는 궤적으로, 최대한 오래 pitch 플레인에 맞춰 유지하면 강한 컨택트 확률이 극대화된다.
Related guides & benchmarks
Put this into your swing
SwingVantage can spot this in your own swing — free to start.
See a sample Baseball report first