Skip to main content

Traduction automatique. L’anglais fait référence ; nous affinerons la formulation au fil du temps. Une suggestion ? Dites-le-nous.

Intermediate

Taux de roulants (ground ball rate)

Also known as: GB%, pourcentage de roulants

Definition

Le taux de roulants (GB%) est le pourcentage de balles frappées qui sont des roulants — généralement un indicateur négatif pour les frappeurs de puissance, même si les frappeurs de contact peuvent l’utiliser stratégiquement.

Les roulants résultent d’angles de lancement inférieurs à 0° (angle négatif). Ils atteignent rarement le champ extérieur et figurent parmi les types de balles frappées à plus faible valeur en moyenne au bâton attendue. Des taux de roulants élevés chez les frappeurs indiquent généralement une trajectoire de barrel raide ou « en dessous et autour », des tendances au rollover, ou une reconnaissance tardive du lancer menant à un contact faible côté tiré. Les frappeurs de contact d’élite dans des stades spacieux peuvent viser intentionnellement le trou entre les joueurs de champ intérieur, mais pour la plupart des frappeurs un GB% élevé signale un défaut de trajectoire. Le taux de roulants moyen professionnel se situe autour de 44% ; sous 40% est considéré comme un bon profil de frappeur pour les joueurs de puissance.

Les taux de roulants portent une information directionnelle au-delà du chiffre agrégé. Des roulants côté tiré en forte concentration indiquent un rollover — le barrel arrive tard et va vers le bas et autour de l’intérieur de la balle. Des roulants au centre et au champ opposé en forte concentration indiquent une trajectoire de barrel trop plate ou trop précoce — le point de contact est trop en avant, et le barrel arrive avant d’avoir atteint l’angle d’attaque optimal. Identifier la distribution directionnelle des roulants permet de diagnostiquer la cause mécanique précise plutôt que de traiter tous les roulants comme le même problème.

Tous les taux de roulants ne sont pas mécaniquement équivalents. Un frappeur avec un taux de roulants de 45% sur les balles rapides et de 32% sur les balles cassantes a un défaut lié au timing sur les balles rapides, pas un problème de trajectoire. Un frappeur avec un GB% constamment élevé sur tous les types de lancers a un problème systématique de trajectoire de barrel ou de rollover. Décomposer le GB% par type de lancer et localisation, c’est ainsi que les diagnostics mécaniques passent de statistiques descriptives à des conclusions exploitables.

Beginner tip

If you are hitting too many grounders, start by identifying where they go. This means consistent pull-side grounders mean focus on timing and letting the ball travel deeper. Consistent opposite-field grounders mean focus on staying through the ball rather than around it.

Advanced note

Map your GB% by pitch type and location in your SwingVantage data. This means if it spikes on specific pitch heights or velocities, you have timing-specific ground ball causes that can be addressed with targeted timing adjustment rather than global swing mechanics changes.

Example

Son taux de roulants de 51% pointait vers un problème de rollover de la main du haut confirmé en vidéo — son barrel arrivait à un angle descendant de 8° en moyenne.

How it shows up on video

On video, ground ball mechanics are visible in the barrel's downward angle at contact. This means a barrel arriving more than 15 degrees below horizontal is almost guaranteed to produce either a pull-side grounder or a rollover. Common error signatures include the barrel visibly drooping below the hands at contact, the back shoulder finishing well below the front shoulder (indicating a downward barrel plane). A follow-through that finishes low rather than wrapping up and over the front shoulder.

Common mistakes

  • Chopping down at the ball in a "swing down for topspin" approach that produces grounders rather than the desired backspin-driven line drives the approach is intended to create
  • Combining a rollover tendency on inside pitches with an attempt to go opposite field on outside pitches using the same swing pattern. This means different causes require different fixes, and using one cue for both produces uneven results
  • Attributing all grounders to timing without checking pitch direction. This means pull-side grounders on pitches away indicate a timing cause. Opposite-field grounders on inside pitches indicate a barrel path cause
  • Using infield defensive shifting as evidence that a high GB% is intentional contact quality when it actually reflects a mechanical pattern that should be corrected

In SwingVantage Motion Lab

SwingVantage plots ground ball direction and launch angle data alongside barrel path angle at contact. This allows direct correlation between the mechanical cause (barrel approach angle) and the batted ball outcome (grounder to which field). The directional ground ball map is one of the most actionable diagnostic outputs in the hitting analysis. This means it converts a statistics problem into a specific location on the diamond where the fix needs to be applied.

Related guides & benchmarks

Put this into your swing

SwingVantage can spot this in your own swing — free to start.

See a sample Baseball report first