Chipping
Chipping é uma tacada curta, jogada de perto do green — um swing pequeno, que coloca a bola rolando rapidamente no green, usando a superfície de putt para conduzi-la até o buraco.
Chipping, no golfe, é uma tacada de trajetória baixa e correndo, tipicamente jogada de perto do green — no fringe, no rough, ou em terreno descoberto perto da superfície de putt. O objetivo fundamental de um chip é pousar a bola no green o mais rápido possível (minimizando o tempo no ar), e deixá-la rolar como um putt até o buraco. Essa trajetória de voo baixo e rolamento longo minimiza as consequências de um controle de distância imperfeito, porque a fase de rolamento no green é mais previsível do que a fase aérea. Tacadas de chip usam um balanço de braço curto e compacto, com rotação mínima do corpo, e uma tacada consistente e acelerando.
O princípio-chave do chipping é "pouse no green, deixe rolar". O ponto de pouso é escolhido primeiro — tipicamente 1-2 metros dentro do green, para permitir que a bola faça a transição do fringe para a superfície do green —, e o taco apropriado é selecionado, para produzir a proporção certa de voo-para-rolamento, para a distância restante até o buraco. Um taco de menos loft (ferro 7 ou 8) voa menos e rola mais, adequado para situações em que o pino fica longe da borda do green. Um taco de mais loft (gap wedge, sand wedge) voa mais e rola menos, adequado para pinos apertados, com pouco green para trabalhar.
Um bom chipping exige contato consistente — bola-e-depois-grama, ou bola-e-depois-tapete —, o que exige uma batida levemente descendente e inclinação de haste para frente no impacto. As mesmas tendências de escavada que causam tacadas gordas e finas no swing completo causam os mesmos problemas no chipping, com menos margem de erro, porque as distâncias são muito pequenas. A técnica de chipping é frequentemente simplificada com a instrução "posicione e esqueça" — inclinação de haste para frente pré-definida, peso pré-definido no lado guia, e um movimento de balanço com os ombros, que mantém essas posições pré-definidas através do impacto.
For instant chipping improvement. This means set up with 70% of your weight on your lead foot and your hands slightly ahead of the ball (preset shaft lean), and make a simple rocking motion with your shoulders. This means no wrist break, no weight shift, no body turn. This preset-and-rock method eliminates most chipping errors for beginners immediately.
Develop a personal fly-to-roll ratio table for your key clubs. This means using your pitching wedge, 8-iron, and 6-iron, chip the same shot (say 30 feet of total distance) and measure how far each lands and how far it rolls. Write these ratios down. Now you have a course-specific reference: "PW = 1/3 fly 2/3 roll, 8i = 1/4 fly 3/4 roll" etc. — this converts club selection from guesswork to calculation.
Example
Um chip de 3 metros de fora do green, com um ferro 9, pousa a um metro dentro do green e rola 3,5 metros até o buraco — o "chip and run", usando o chão como uma ferramenta.
How it shows up on video
From a face-on camera angle, proper chipping shows the hands preset slightly ahead of the ball at address and maintained in this position through impact. This means shaft lean forward throughout. The motion appears as a compact rocking of the arms and shoulders with minimal body rotation or weight shift. A flip or scoop shows the lead wrist breaking down and the hands falling behind the ball at impact. From a down-the-line angle, the chip swing plane is slightly more upright than a full swing. The club tracks on a consistent inside-square-inside path without the full swing plane traits.
Common mistakes
- Trying to "scoop" the chip into the air. This means the ball should be compressed along the ground (contact turf just after the ball) and the loft of the club does the lifting. Scooping produces uneven contact — sometimes fat, sometimes thin — and removes spin and distance control.
- Using the same club for every chip regardless of situation. This means a single-club chipping approach ignores the fly-to-roll ratio that should match the specific pin location and available green. A versatile chipper adjusts club selection to the situation.
- Allowing the trail wrist to "collapse" through impact — the trail wrist should maintain slight backward bend through the chip strike. When it collapses and the trail hand flips past the lead hand, the result is a scoop or flip that costs consistency.
- Not practicing from actual grass and rough conditions — chipping from perfect mats does not simulate the variable lie conditions on the course. Practice from actual grass, rough, and tight lies to build the contact consistency required on the course.
In SwingVantage Motion Lab
SwingVantage evaluates chipping from face-on video by analyzing shaft lean at impact, lead wrist position throughout the stroke. The body motion (minimal rotation versus excessive sway or pivot). The system can identify the most common chip faults. This means scooping, deceleration, and excessive body movement. This comes from face-on footage, with confidence labels based on video quality and camera positioning.
Related terms
- PitchingPitching é uma tacada de jogo curto de meia distância, que leva a bola a maior parte do caminho até o alvo, com uma batida descendente e giro controlado, tipicamente de 27 a 91 metros.
- Chip and runUm chip and run é um chip baixo e quicante, que entra na superfície de putt rapidamente e rola em direção ao buraco — a escolha de jogo curto mais segura, quando há espaço entre a bola e a borda do green.
- Bump and runUm bump and run é um chip baixo, que usa o fringe e o green para conduzir a bola — batida na superfície logo depois do fringe, e deixada rolar até o buraco, como um putt.
- Leitura de green (green reading)Leitura de green é avaliar a inclinação, o grão e a velocidade de uma superfície de putt, para prever o quanto e em qual direção a bola vai curvar, desde sua linha inicial até o buraco.
Related guides & benchmarks
Put this into your swing
SwingVantage can spot this in your own swing — free to start.
See a sample Golf report first