Holing Out (Caught in the Deep)
Also known as: holed out, hole out, caught in the deep, caught on the boundary, why do I keep holing out
Holing out means being caught after hitting the ball in the air, usually by a fielder in the deep. It usually happens when a lofted shot does not clear the boundary or goes straight to a fielder placed for it. Contact, ball choice and reading the field all play a part.
A lofted shot carries risk. If the ball is caught before it touches the ground, the batter is out caught under Law 33.1. When the catch comes from a big shot to a fielder in the deep, cricket says the batter holed out. It is most common in limited-overs cricket, where batters must take more risks.
Several things decide whether a lofted shot clears the rope. Clean contact with the middle of the bat matters most. A ball hit off the toe, the splice or a top edge loses distance. Choosing the right ball matters too. A full ball in your hitting area carries further than one you have to reach for. The size of the boundary and the wind also play a part.
Possible contributors to a pattern of holing out include hitting to the longest boundary, attacking the wrong ball, swinging too hard and ignoring where the deep fielders are. Many batters check the field before each ball and aim for gaps or the shorter side. Range-hitting practice can track how often a shot clears a set distance.
Tips by skill level
Before you try a big shot, look where the deep fielders are. Aim for a gap or the shorter boundary.
Keep a record of your lofted shots in practice, including how many clear the rope and off which balls. Use it to choose your areas and lengths in matches.
Example
Needing 12 off the last over, a batter slogs a length ball towards the longest boundary. It comes off the toe of the bat, and long-on takes the catch a few metres inside the rope.
Why it matters
Every lofted shot is a trade between runs and risk. Knowing why you hole out helps you pick better balls and better areas to hit.
How it shows up on video
Side-on, check the contact. A mistimed lofted shot often shows the head lifting, the front shoulder opening early or the ball meeting the toe or splice.
Common mistakes
- Hitting to the longest boundary when a shorter one is open.
- Trying to hit a good-length ball for six instead of a ball in your hitting area.
- Swinging harder after a mistimed shot instead of hitting cleaner.
Frequently asked questions
What does holing out mean in cricket?
It means being caught from a lofted shot, usually by a fielder in the deep. The batter tried to hit over the field but did not clear it.
Why do I keep holing out?
Common reasons are mistiming, choosing the wrong ball to hit and aiming at the longest boundary or straight at a fielder. Pick your ball and your area before you swing.
Sources
Related terms
- Lofted DriveA lofted drive lifts the ball over the fielders instead of along the ground. Get close to the pitch of the ball, keep your head still and swing through the line with a full face and a high finish. Choose a full ball and check the field first. Decide whether you only need to clear the infield or go all the way.
- Power Hitting (Six Hitting)Power hitting comes from a stable base, a still head and fast bat speed through the ball, not from swinging harder with the arms. Read the length early and clear your front leg if you need room. Swing through the line with a full face and full extension.
- CaughtCaught is a way of being out in cricket. The batter is out when a fielder catches the ball before it touches the ground, after it has come off the bat or a glove on the hand holding the bat (Laws 33.1 and 5.6).
- Boundary (Four and Six)A boundary is scored when the ball reaches or crosses the edge of the playing area. If the batter hits the ball and it lands beyond the boundary without touching the ground first, it is six runs. If it bounces or rolls over first, or reaches it without being hit by the bat, it is four. A ball that touches the rope, or a fielder who is touching the ground beyond it, counts as reaching the boundary.
- Targeting the Short BoundaryTargeting the short boundary means aiming your attacking shots at the side of the ground where the boundary is closest. A slight mishit there is more likely to reach or clear the rope. Bowlers and captains respond with lines and fields that make that side harder to reach.
- Toe-End and Splice Mis-HitsA toe-end is a shot hit off the very bottom of the bat, below the middle. A ball off the splice hits high on the blade, near where it joins the handle. Both are mis-hits that usually come off the bat slowly and can pop up for a catch.
Available in other languages
Put this into practice
Film one shot to see whether this is the thing to work on first — free to start.