Targeting the Short Boundary
Also known as: short boundary, hitting to the short boundary, short side of the ground, using the short boundary, playing to the short side
Targeting the short boundary means aiming your attacking shots at the side of the ground where the boundary is closest. A slight mishit there is more likely to reach or clear the rope. Bowlers and captains respond with lines and fields that make that side harder to reach.
Cricket grounds are rarely perfect circles. The pitch may be off-centre, or the ground may simply be an odd shape. So one boundary can be much closer than another. Under Law 2.3.1.4 and Law 19.1.1. The umpires set the boundary with the captains before the toss, and it stays fixed for the match. Competitions may add their own limits on boundary size.
A shorter boundary changes the odds for a batter. A shot that would be caught near the rope on the long side may carry for six on the short side. In limited-overs cricket, batters often plan to score their boundaries towards it. A right-hander with a short leg-side boundary may look to pull and slog-sweep more. Left-handers mirror this. A strong wind blowing towards one side can have a similar effect.
Bowlers adjust too. They may bowl wider lines, or use angles that make the short side harder to reach, and place their best deep fielder there. The batter then has to create the angle, by moving in the crease or using the feet. Many batters check the boundary sizes and the wind before the innings, so the plan is ready.
Tips by skill level
Before you bat, look at the boundary from the side of the ground. Note which side is the shortest.
Plan two scoring options, one towards the short side and one for when the bowler takes it away. Practise reaching your short side against wide lines.
Example
On a ground with a short leg-side boundary, a right-hander looks to pull anything short. The bowler responds by bowling wide outside off stump, so the batter has to move across to reach the ball.
Why it matters
Boundary size changes which shots are worth the risk. Reading the ground is one of the simplest edges a batter can gain.
How it shows up on video
From a wide or overhead angle, compare where the batter hits boundaries with the shape of the ground. A batter targeting the short side shows a cluster of big shots towards it.
Common mistakes
- Ignoring the ground's shape and hitting to the long boundary.
- Forcing every shot to the short side, even when the bowler's line makes it hard.
- Forgetting that the bowler's plan will change once you start targeting it.
Frequently asked questions
Why do batters target the short boundary?
Because a shot there needs less distance to reach or clear the rope. A slight mishit can still go for four or six.
Who decides how big the boundary is?
Under Law 19.1.1, the umpires set the boundary before the toss, after meeting the captains, and it is fixed for the match. Many competitions also set limits in their playing conditions.
Sources
Related terms
- Boundary (Four and Six)A boundary is scored when the ball reaches or crosses the edge of the playing area. If the batter hits the ball and it lands beyond the boundary without touching the ground first, it is six runs. If it bounces or rolls over first, or reaches it without being hit by the bat, it is four. A ball that touches the rope, or a fielder who is touching the ground beyond it, counts as reaching the boundary.
- Holing Out (Caught in the Deep)Holing out means being caught after hitting the ball in the air, usually by a fielder in the deep. It usually happens when a lofted shot does not clear the boundary or goes straight to a fielder placed for it. Contact, ball choice and reading the field all play a part.
- Power Hitting (Six Hitting)Power hitting comes from a stable base, a still head and fast bat speed through the ball, not from swinging harder with the arms. Read the length early and clear your front leg if you need room. Swing through the line with a full face and full extension.
- Finding Gaps in the FieldTo find gaps, look at the field before every ball and pick the space you will aim for. Then use the angle of the bat face and soft or firm hands to place the ball there. Hit along the ground into the space between fielders and run hard for the single.
- T20 Batting ApproachT20 batting means scoring quickly from the first ball while keeping enough wickets for the end. Attack the gaps in the six-over powerplay, rotate the strike and pick off bad balls in the middle overs, and save the biggest hitting for the death. Know your best scoring areas and which bowlers you want to target.
- Batting to the Situation (Match Awareness)Batting to the situation means choosing your tempo and risk to suit the match, not just the ball. The score, the overs or time left, the wickets in hand, the pitch and your partner all shape what the team needs. The same ball might be left in one match and attacked in another.
Available in other languages
Ready to work on your own batting?
This term is background, not something video measures. Film one shot to find the one thing to work on first — free to start.