Skip to main content

Traducción automática. El inglés es la versión de referencia; iremos puliendo la redacción. ¿Ves algo que mejorar? Cuéntanoslo.

Beginner

Distancia de lanzamiento

Definition

La distancia de lanzamiento es la distancia medida desde el caucho de lanzamiento hasta el plato. En el softball de slow-pitch es comúnmente de 50 pies (15 m), aunque algunas ligas usan 46 o 53 pies (14 o 16 m) según la edad y la división.

Una distancia de lanzamiento más larga da a la bola más tiempo y aire para completar el arco, lo que facilita lograr un descenso pronunciado. Una distancia más corta requiere un ángulo de soltada más pronunciado para alcanzar la misma ventana de arco, lo que estrecha el margen de error del lanzador. Los bateadores en las ligas de mayor distancia tienen más tiempo para leer el arco, pero deben ser más pacientes; las ligas de menor distancia exigen una sincronización más rápida.

Beginner tip

Before your first game at a new distance, throw 20 warm-up pitches in particular to re-calibrate your arc feel for the new rubber location.

Advanced note

Film yourself pitching from both 46-foot and 50-foot rubbers and compare release angle and step length — those differences are your calibration targets when switching leagues.

Example

Al pasar de una distancia de lanzamiento de 46 pies (14 m) a una de 50 pies (15 m), el lanzador descubre que la bola sube de forma natural más alto y tiene más tiempo para caer en la zona.

How it shows up on video

On video, measure the rubber-to-plate distance using a known reference (base path = 65 feet in slow pitch. USSSA uses 65 or 70) and confirm it matches the stated league distance. Watch the pitcher's stride length as a proportion of the pitching distance. This means a very short stride at 50 feet often indicates poor forward momentum and arc uneven results. Reviewing total ball flight time across pitches helps batters calibrate their load timing for the specific distance.

Common mistakes

  • Pitchers not adjusting release angle when moving between 46-foot and 50-foot rubbers, causing arc-height violations at the new distance
  • Batters using the same load timing from a different-distance league without adjusting, arriving reliably early or late
  • Coaches not confirming the official pitching distance before warm-ups, leading to a mechanical surprise on the first inning pitch
  • Pitchers overcorrecting at longer distances by pushing harder rather than adjusting angle, increasing speed beyond league limits

In SwingVantage Motion Lab

SwingVantage can calibrate its arc and timing analysis to the specific pitching distance entered by the user, ensuring all angle and flight-time measurements are accurate for the league context.

Related guides & benchmarks

Put this into your swing

SwingVantage can spot this in your own swing — free to start.

See a sample Slow-Pitch Softball report first