Blocking
Also known as: Push-Block, den Release zurückhalten
Blocking ist, wenn Arme und Schläger durch den Impact nicht vollständig releasen – die Schlagfläche wird offen gehalten, und der Ball fliegt gerade nach rechts (für einen Rechtshänder), ohne Draw-Kurve.
Ein Block im Golf ist ein Shot, der rechts vom Ziel startet (für einen rechtshändigen Golfer) und rechts weiterfliegt – in gerader Linie oder mit leichtem Draw, aber ohne zur beabsichtigten Linie zurückzukehren. Er ist das Gegenteil eines Pull oder Hook: Beide beinhalten einen In-to-out-Schlägerpfad, aber ein Pull startet links, weil der Pfad Out-to-in ist, während ein Block rechts startet, weil der Pfad In-to-out ist und die Schlagfläche relativ zu diesem Pfad offen ist. Die Ursache von Blocking zu verstehen erfordert, Pfad von Schlagflächenwinkel zu trennen – keines allein bestimmt das Ergebnis; die Kombination tut es.
Blocking wird meist durch eines von zwei mechanischen Mustern verursacht. Das erste ist eine gestoppte Rotation: Der Unterkörper führt so aggressiv, dass der Körper stoppt oder hängt, was Arme und Schläger hinter dem rotierenden Körper steckenlässt, ohne Raum zum Releasen. Der Schläger verlässt die Impact-Zone nach rechts zeigend, und die Schlagfläche – unfähig, sich rechtzeitig zu schließen – geht mit. Das zweite ist eine manuell gehaltene Schlagfläche: Ein Golfer, der versucht, nicht zu hooken (vielleicht nach Überkorrektur von einem Flip), hält die Schlagfläche vielleicht bewusst offen, was selbst bei korrektem Pfad einen Block erzeugt.
Blocking ist bei höheren Schwunggeschwindigkeiten häufig, weil die beteiligten Zentrifugalkräfte eines schnellen Swings mehr aktive Unterarmrotation erfordern, um die Schlagfläche zu schließen. Freizeitgolfer, die plötzlich Geschwindigkeit hinzufügen (vielleicht durch ein Driver-Fitting oder ein Trainingsprogramm), stellen manchmal fest, dass ihre bestehende Unterarmrotation nun unzureichend ist, um die Schlagfläche bei der neuen Geschwindigkeit zu schließen, was Blocks erzeugt. Das Release-Timing anzupassen – der Unterarmrotation erlauben, früher und aggressiver zu beginnen – ist typischerweise die technische Lösung, oft kombiniert mit einer Griffanpassung Richtung stärker, um die Rotationsanforderung zu reduzieren.
If you are blocking shots, check your finish. This means a blocked shot often produces a finish where the club wraps behind your neck and your hands end up on the right side of your head (for a right-hander). This means a full, high finish with the club wrapping to the left side indicates better forearm rotation and less blocking.
Use a box or headcover placed just outside the ball on the right side (target side) of your stance as a path reference. This means if you are blocking, your club will miss the box to the right. Practice clearing the box by starting the face closing earlier in the downswing. This forces the forearms to rotate rather than the body stalling.
Example
Ein Spieler, der unter Druck durch den Shot „versteift“ und den Ball tot nach rechts fliegen sieht, hat geblockt – der Release wurde abgeschnitten.
How it shows up on video
From a face-on camera angle, a block often shows the hips rotating aggressively. At the same time, the arms appear to lag behind the body rotation and exit the impact zone to the right. The lead shoulder may remain low or the body may appear to "hang back" slightly at impact, with the arms pushing rather than swinging freely. From a down-the-line angle, the club path of a block appears in-to-out. But unlike a draw, the face appears open relative to the path, pointing to the right of where the club is traveling. This means this face-to-path relationship is what produces the straight-right trajectory.
Common mistakes
- Aiming left to compensate for blocks — this reinforces the open face delivery by reducing the pressure to close the face. Fixing the root cause (stalled rotation or held face) is the only sustainable solution.
- Adding more in-to-out path to try to fix the block. This means if the face is open relative to the path, more path to the right makes the block worse, not better. The face needs to close, not the path needs to change.
- Mistaking a block for a push. This means a push and a block can look similar (ball going right). But a push typically comes from an out-to-in path with a square face pointing right. At the same time, a block comes from an in-to-out path with an open face. The fix is different for each.
- Over-rotating the forearms to fix the block (creating hooks) — the opposite of the block problem. Adding forearm rotation is the right direction, but calibrating the amount requires monitoring ball flight to find the point where neither block nor hook dominates.
In SwingVantage Motion Lab
SwingVantage can observe blocking patterns from face-on video by analyzing hip-to-arm timing through impact. This means in particular, whether the arms appear to lag behind the body rotation and exit to the right. Club path and face angle inference from ball flight and impact data provides additional context. The system labels these observations with appropriate confidence based on available video quality.
Related terms
- ReleaseDer Release ist das natürliche Aufwickeln der Handgelenke und die Rotation der Unterarme durch den Impact, was die Schlagfläche quadriert und maximale Geschwindigkeit liefert.
- PushEin Push fliegt völlig gerade und endet rechts von dort, wo du gezielt hast, für einen Rechtshänder. Nichts kurvt – der Kopf reiste durch den Impact einfach nach rechts, mit der Fläche, die in dieselbe Richtung zeigte.
- Early ExtensionEarly Extension ist das Vorschieben der Hüfte Richtung Ball während des Downswings, was den Golfer aus der Haltung aufrichten lässt und Kompensationen beim Impact erzwingt.
- Hip ClearanceHip Clearance ist die Rotation der führenden Hüfte aus dem Weg durch den Impact, was Raum für Arme und Schläger schafft, frei am Körper vorbei zu schwingen.
Related guides & benchmarks
Put this into your swing
SwingVantage can spot this in your own swing — free to start.
See a sample Golf report first