Blocco del Rilascio
Also known as: push-block, trattenere il release
Il blocking è quando braccia e bastone non riescono a rilasciarsi completamente attraverso l'impatto — la faccia viene tenuta aperta e la palla vola dritta a destra (per un destrimano) senza curva da draw.
Un block nel golf è un colpo che parte a destra del bersaglio (per un golfista destrimano) e continua a destra — viaggiando in linea retta o curvando leggermente, ma non tornando sulla linea prevista. È l'opposto di un pull o un hook: entrambi coinvolgono un percorso del bastone in-to-out, ma un pull parte a sinistra perché il percorso è out-to-in, mentre un block parte a destra perché il percorso è in-to-out e la faccia è aperta rispetto a quel percorso. Comprendere la causa del blocking richiede di separare percorso da angolo della faccia — nessuno dei due da solo determina il risultato; è la combinazione a farlo.
Il blocking è più comunemente causato da uno di due pattern meccanici. Il primo è una rotazione bloccata: la parte inferiore del corpo guida così aggressivamente che il corpo si blocca o resta indietro, lasciando braccia e bastone intrappolati dietro il corpo in rotazione senza spazio per rilasciarsi. Il bastone esce dalla zona di impatto puntando a destra, e la faccia — incapace di chiudersi in tempo — lo segue. Il secondo è una faccia tenuta manualmente: un golfista che sta cercando di non fare hook (magari dopo aver sovracorretto da un flip) potrebbe tenere consapevolmente la faccia aperta, producendo un block anche con un percorso corretto.
Il blocking è comune a velocità di swing più alte perché le forze centrifughe coinvolte in uno swing veloce richiedono una rotazione degli avambracci più attiva per chiudere la faccia. I golfisti amatoriali che improvvisamente aggiungono velocità (magari attraverso un fitting del driver o un programma di allenamento) a volte scoprono che la loro rotazione degli avambracci esistente è ora insufficiente per chiudere la faccia alla nuova velocità, producendo block. Aggiustare il tempismo del release — permettere agli avambracci di iniziare a ruotare prima e più aggressivamente — è tipicamente la soluzione tecnica, spesso combinata con un aggiustamento del grip verso uno più forte per ridurre la richiesta rotazionale.
Tips by skill level
If you are blocking shots, check your finish. A blocked shot often produces a finish where the club wraps behind your neck and your hands end up on the right side of your head (for a right-hander) — a full, high finish with the club wrapping to the left side indicates better forearm rotation and less blocking.
Use a box or headcover placed just outside the ball on the right side (target side) of your stance as a path reference — if you are blocking, your club will miss the box to the right. Practice clearing the box by starting the face closing earlier in the downswing. This forces the forearms to rotate rather than the body stalling.
Example
Un giocatore sotto pressione che si "irrigidisce" durante il colpo e vede la palla volare dritta a destra ha fatto un block — il release è stato interrotto.
How it shows up on video
From a face-on camera angle, a block often shows the hips rotating aggressively while the arms appear to lag behind the body rotation and exit the impact zone to the right. The lead shoulder may remain low or the body may appear to "hang back" slightly at impact, with the arms pushing rather than swinging freely. From a down-the-line angle, the club path of a block appears in-to-out. But unlike a draw, the face appears open relative to the path, pointing to the right of where the club is traveling. This face-to-path relationship is what produces the straight-right trajectory.
Common mistakes
- Aiming left to compensate for blocks — this reinforces the open face delivery by reducing the pressure to close the face. Fixing the root cause (stalled rotation or held face) is the only sustainable solution.
- Adding more in-to-out path to try to fix the block — if the face is open relative to the path, more path to the right makes the block worse, not better. The face needs to close, not the path needs to change.
- Mistaking a block for a push. A push and a block can look similar (ball going right). But a push usually comes from an out-to-in path with a square face pointing right. At the same time, a block comes from an in-to-out path with an open face. The fix is different for each.
- Over-rotating the forearms to fix the block (creating hooks) — the opposite of the block problem. Adding forearm rotation is the right direction, but calibrating the amount requires monitoring ball flight to find the point where neither block nor hook dominates.
In SwingVantage Motion Lab
Motion Lab does not read club path or face angle, so it cannot tell a block from a push or a draw. It does read whether your hips peak in speed before your shoulders and hands, and how far your hips slide side to side. Start direction and face-to-path come from a launch monitor you import.
Open Golf in Motion LabRelated terms
- RilascioIl release è il naturale sblocco dei polsi e la rotazione degli avambracci attraverso l'impatto che squadra la faccia del bastone e consegna la massima velocità.
- SpintaUn push vola perfettamente dritto e finisce a destra di dove hai mirato, per un destrimano. Nulla curva — la testa del bastone stava semplicemente viaggiando verso destra attraverso l'impatto con la faccia puntata nella stessa direzione.
- Estensione AnticipataL'early extension è la spinta delle anche verso la palla durante il downswing, che fa alzare il golfista fuori dalla postura e forza compensazioni all'impatto.
- Apertura delle AncheL'hip clearance è la rotazione dell'anca guida fuori strada attraverso l'impatto, creando spazio perché braccia e bastone facciano swing liberamente oltre il corpo.
Available in other languages
Related guides & benchmarks
Put this into your swing
Film one swing to see how your movement compares — free to start.
See a sample Golf report first