Skip to main content

Traduction automatique. L’anglais fait référence ; nous affinerons la formulation au fil du temps. Une suggestion ? Dites-le-nous.

Intermediate

Push

Also known as: poussé droit à droite

Definition

Un push est un coup qui part et vole droit à droite (pour un droitier) sans courbe significative, causé par une trajectoire de l’intérieur vers l’extérieur avec une face correspondant à la direction de la trajectoire.

Un push au golf (parfois appelé "push droit") est un coup qui part à droite de la cible (pour un droitier) et voyage en ligne assez droite vers la droite — sans la courbe d’un block-fade ni le hook d’un draw. Contrairement à un slice (qui part à gauche et s’incurve à droite) ou à un blocage (qui part à droite et s’incurve un peu plus), un push voyage en ligne droite simplement visée dans la mauvaise direction. Le modèle du plan D aide à expliquer pourquoi : un push résulte d’une trajectoire de club de l’intérieur vers l’extérieur et d’un angle de face qui correspond à la trajectoire (carrée par rapport à la trajectoire mais pointant à droite de la cible).

Les causes mécaniques d’un push sont en général l’un de deux schémas. Le premier est une trajectoire fortement de l’intérieur vers l’extérieur avec une face carrée par rapport à la trajectoire (et donc pointant à droite). Cela arrive quand un golfeur travaille à éliminer un hook en maintenant la face ouverte, ce qui se combine à la trajectoire de l’intérieur vers l’extérieur pour produire un push. Le second est une descente coincée et bloquée où le côté arrière ne dégage pas bien et la trajectoire du club sort à droite — souvent vu chez des joueurs plus forts et athlétiques dont la rotation du corps est puissante mais dont les bras et le club restent derrière la rotation.

Un push est distinct d’un pull (part à gauche, va à gauche) et d’un push-slice (part à droite, s’incurve davantage à droite). La présence d’un push indique que la face est au moins à peu près carrée par rapport à la trajectoire : il faut seulement que la trajectoire soit plus neutre plutôt que de l’intérieur vers l’extérieur. Les joueurs qui font des push systématiquement sont souvent proches d’un bon swing et n’ont besoin que d’ajustements mineurs de trajectoire plutôt que de refontes fondamentales.

Beginner tip

If you push shots reliably, check your finish. This means a push often produces a finish where your arms swing out to the right and your belt buckle does not fully rotate to face the target. Focus on rotating your entire body through impact. As a result, your belt buckle faces the target at the finish. This means this fuller rotation typically eliminates the stuck-arms pattern that causes pushes.

Advanced note

Use a launch monitor to check your club path number. This means a consistent positive path (e.g., +4° to +8°) combined with a face angle that is near zero relative to path (but positive relative to target) is the signature of a push. Reducing the path toward neutral (+1° to +2°). At the same time, maintaining face control typically resolves persistent push patterns without introducing a new miss in the other direction.

Example

Un fer à sensation solide qui part à droite du drapeau et reste à droite, atterrissant à droite du green, est un push — pas un slice, car il ne s’incurve pas.

How it shows up on video

From a face-on camera angle, a push shot shows the ball starting right of the target and continuing in that direction. The telltale body pattern that produces a push is visible from face-on as the arms appearing to be "stuck" behind the body rotation. This means the hands and club exiting the impact zone to the right rather than following through toward the target. From a down-the-line angle, a push path shows the club traveling in-to-out through impact. This means crossing the target line from inside to outside rather than traveling along or slightly to the inside after impact.

Common mistakes

  • Aiming left to compensate for pushes — this accommodates the bad habit rather than fixing it. If the path is in-to-out and the face is square to the path. This moves aim further left just produces a bigger push or, with a face that is now left of the path, a hook.
  • Confusing a push with a block — a push travels straight right; a block travels right and may have a slight fade. Both have in-to-out paths, but the face-to-path relationship differs. Understanding which you have matters because the fix is slightly different.
  • Over-correcting into a left miss (pull or hook) — adding excessive out-to-in path to fix a push will produce pulls or hooks. The target is a neutral path (0° to +2°), not a significant swing in the other direction.
  • Assuming push = in-to-out path without confirming. This means some pushes come from a delayed release that starts in the right direction but the face is open at impact. A launch monitor reading is the most reliable way to confirm path and face data rather than guessing from ball flight alone.

In SwingVantage Motion Lab

SwingVantage can estimate push patterns from the ball flight direction (starting right, no curve) combined with observable body patterns from video. This means in particular arms getting stuck behind body rotation in the impact zone. Down-the-line video showing the club traveling in-to-out through impact provides the most direct path observation for diagnosing push patterns.

Related guides & benchmarks

Put this into your swing

SwingVantage can spot this in your own swing — free to start.

See a sample Golf report first