Skip to main content

Traduction automatique. L’anglais fait référence ; nous affinerons la formulation au fil du temps. Une suggestion ? Dites-le-nous.

Beginner

Caoutchouc de lancer

Also known as: plaque du lanceur, caoutchouc

Definition

Le caoutchouc de lancer est la dalle de caoutchouc blanche sur le monticule du lanceur d’où le lanceur doit commencer et compléter une livraison légale. Quitter ou glisser du caoutchouc de façon incorrecte entraîne un lancer illégal.

Un lanceur de slow-pitch doit avoir au moins un pied sur le caoutchouc ou le touchant quand le lancer est relâché. Le caoutchouc ancre la livraison à une distance fixe du marbre, garantissant que l’arc et la synchronisation sont constants pour tous les lanceurs. Il définit aussi les infractions de position illégale : si les deux pieds sont complètement hors du caoutchouc au relâchement, le lancer est illégal. Les bons lanceurs se poussent du caoutchouc pour générer de l’élan vers l’avant et de la constance d’arc.

Beginner tip

Place both feet on the rubber before each pitch, step forward with your stride foot, and push off with your back foot. This means this simple sequence keeps you legal every time.

Advanced note

Experiment with lateral foot position on the rubber (center vs. Sides) to find the alignment that produces your most consistent arc, then mark that spot with tape in practice.

Example

Le pied arrière du lanceur reste en contact avec le caoutchouc jusqu’au relâchement, satisfaisant l’arbitre et établissant une distance de livraison légale.

How it shows up on video

Film the pitcher's feet at the moment of release and confirm at least one foot is in contact with the rubber. This means toe contact counts. But a clearly lifted back foot does not. Watch for a consistent push-off with the back foot driving forward rather than a flat-footed release, which indicates poor rubber mechanics. After repeated pitches, check whether the rubber position is consistent or whether the pitcher is gradually drifting forward, shortening the effective legal distance.

Common mistakes

  • Lifting both feet off the rubber before the ball is released, creating an illegal-position violation that umpires will call immediately
  • Failing to push off the rubber effectively, producing a weak and low arc that reliably misses the 6-foot minimum
  • Setting up with feet misaligned on the rubber (straddling the side edge), which invites illegal-position questions from plate umpires
  • Drifting forward over multiple pitches until the toe is ahead of the rubber, shortening the effective pitching distance illegally without noticing

In SwingVantage Motion Lab

SwingVantage can identify rubber-contact compliance issues by tracking foot position relative to the rubber plate through the release frame in uploaded pitch video.

Related guides & benchmarks

Put this into your swing

SwingVantage can spot this in your own swing — free to start.

See a sample Slow-Pitch Softball report first