Nip-Backer (Seaming Back In)
Also known as: nip backer, nipbacker, ball that nips back, seaming back in, nipping back off the seam
A nip-backer is a seam delivery that lands on or just outside off stump, then moves back in off the pitch towards the batter. For a right-handed batter it moves from off to leg. It is movement off the seam, not swing.
The name comes from the ball nipping back off the seam. The bowler presents an upright seam, the ball lands on the stitching and darts in towards the batter. Glossaries describe it as similar in effect to an off-cutter. The difference is how it is made. An off-cutter comes from rolling the fingers across the ball. A nip-backer comes from seam movement with a normal seam-up release.
It is a classic way to win leg-before and bowled decisions. Batters often leave balls outside off stump or play for one that holds its line or moves away. The nip-backer punishes that by coming back to hit the pad or the stumps. It also brings the inside edge on to the stumps into play. It is usually bowled on a good length or a little shorter.
Bowlers cannot always choose which way an upright seam will move. Some balls nip back, some go away and some go straight on. Skilled seamers can make the nip-backer more likely with small changes to the seam angle and wrist. For a left-handed batter everything mirrors, with the ball moving from their off side towards their pads.
Example
A right-hander shoulders arms to a ball pitching just outside off stump. It lands on the seam, nips back sharply and clips the top of off stump.
Why it matters
The nip-backer is one of the most dangerous balls in seam bowling. It turns a batter's safe leave into a dismissal.
Frequently asked questions
What is the difference between a nip-backer and an inswinger?
An inswinger curves in through the air before it lands. A nip-backer travels fairly straight, then moves in off the pitch after landing on the seam.
Is a nip-backer the same as an off-cutter?
They move the same way but are made differently. An off-cutter comes from rolling the fingers across the ball. A nip-backer comes from the seam with a normal release.
Sources
Related terms
- Seam BowlingSeam bowling is a style of pace bowling where the ball is gripped so the seam is upright and the ball lands on the seam. This causes it to deviate unpredictably off the pitch.
- Off-CutterThe off-cutter is a pace bowling variation where the ball is cut off the index finger and middle finger to spin towards the off side off the pitch, acting like a slow off-break without a full-length spin action.
- In-SwingIn-swing is conventional swing bowling where the ball curves in the air from off to leg (in towards the body of a right-handed batter), often targeting the stumps or pads.
- LBW (Leg Before Wicket)For LBW under MCC Law 36.1, the delivery must not be a No ball.
- Upright Seam (Seam Presentation)An upright seam means the ball leaves the hand with its stitched seam standing up, spinning backwards in a steady line. It is the base for both swing and seam movement. Bowlers call this presenting the seam.
- Leaving the BallLeaving the ball means choosing not to play at a delivery and lifting your bat and hands up out of its path. As a result, it goes through to the keeper. Leave balls you judge will miss the stumps, usually those wide of off stump or bouncing over the top. Move your feet into position first, then lift the bat high and keep watching the ball until it passes you.
Available in other languages
Put this into practice
Film one shot to see whether this is the thing to work on first — free to start.