पुल
एक पुल साफ तरीके से मारा जाता है और सीधा उड़ता है; यह बस गलत लाइन पर निकलता है, राइट-हैंडर के लिए आपके एम के बाएं जाता हुआ, बिना किसी चीज़ के इसे वापस मोड़े।
गोल्फ में एक पुल एक शॉट है जो टारगेट के बाईं तरफ (राइट-हैंडेड गोल्फर के लिए) शुरू होता है और बाईं तरफ एक काफी सीधी लाइन में ट्रैवल करता है — बिना हुक के दाएं-से-बाएं कर्व के। बॉल बाएं लॉन्च होती है और बाएं जारी रहती है, जो दिखाता है कि क्लब पाथ और फेस एंगल दोनों टारगेट के बाएं पॉइंट कर रहे हैं। बॉल फ्लाइट के D-प्लेन मॉडल के अनुसार, एक पुल तब होता है जब क्लब पाथ आउट-टू-इन होता है और फेस उस पाथ के स्क्वायर होती है (टारगेट के बाएं पॉइंट करती है लेकिन पाथ की उसी दिशा में)। सीधी-बाईं ट्रैजेक्टरी (कोई कर्व नहीं) पुष्टि करती है कि फेस-टू-पाथ का रिश्ता अपेक्षाकृत स्क्वायर है।
पुल आउट-टू-इन क्लब पाथ से करीबी रूप से जुड़े होते हैं जो स्लाइस भी पैदा करता है — अंतर सिर्फ इम्पैक्ट पर फेस एंगल में है। जब एक आउट-टू-इन पाथ एक खुली फेस (पाथ के सापेक्ष खुली) के साथ जुड़ती है, तो नतीजा एक पुल-स्लाइस होता है; जब वही आउट-टू-इन पाथ एक स्क्वायर फेस (पाथ की दिशा से मेल खाती हुई) के साथ जुड़ती है, तो नतीजा एक पुल होता है। कई गोल्फर जो अपना स्लाइस कम करने पर काम करते हैं वे सुधार की तरफ एक कदम के रूप में शॉट पुल करना शुरू करते हुए नोटिस करते हैं — पाथ अभी भी आउट-टू-इन है, लेकिन उन्होंने पाथ के सापेक्ष फेस को सफलतापूर्वक बंद कर लिया है, जो प्रगति है भले ही बॉल अभी भी बाएं मिस हो।
एक पुल जो कंसिस्टेंट और सीधा है (कर्व नहीं करता) आमतौर पर एक पुल-स्लाइस से संबोधित करना आसान होता है क्योंकि आउट-टू-इन पाथ बची हुई समस्या है न कि पाथ और फेस दोनों। पाथ को अक्सर अतिरिक्त फेस-मैनेजमेंट बदलावों के बिना ट्रांज़िशन वर्क (लोअर-बॉडी-लेड डाउनस्विंग) के ज़रिए संबोधित किया जा सकता है।
Tips by skill level
For a quick pull-cause check: place a head cover just outside the ball on the target side and practice swings — if you hit the head cover, your path is out-to-in. The goal is to swing inside the head cover, which trains the in-to-out or neutral path that eliminates pulls.
Diagnose pulls precisely with a launch monitor: check your club path number (negative = out-to-in, which produces pulls) and your face angle relative to path. If both are negative by the same amount (e.g., path -5°, face -5°), you are pulling. If face is less negative than path (e.g., path -5°, face -2°), you are pull-fading. Knowing the exact data lets you work on the specific variable (path) rather than guessing.
Example
एक सीधा शॉट जो फ्लैग के बाएं शुरू होता है और ग्रीन के बाएं लैंड करता है — बिल्कुल सीधा लेकिन गलत दिशा — एक पुल है, हुक नहीं।
How it shows up on video
A pull is visible as a shot starting and continuing left of the target with minimal curve. From a face-on camera angle, the body pattern that produces a pull is visible as the lead shoulder "throwing" outward and upward in the transition. The over-the-top move — which produces the out-to-in path. From down-the-line, the club travels outside the backswing plane in the downswing and arrives at the ball from outside the target line, crossing to the inside after impact.
Common mistakes
- Aiming right to compensate for pulls — accommodating the pull with aim adjustment reinforces the out-to-in path indefinitely. Fixing the transition sequencing is the correct solution.
- Confusing a pull with a pull-hook — a pull goes straight left; a pull-hook starts left and curves further left (or turns sharply left). The pull-hook indicates a closed face relative to an already out-to-in path, while a pull indicates the face is matching the path. Different combinations require different fixes.
- Thinking a pull is better than a slice and therefore acceptable — both pull and slice patterns involve an out-to-in path. The pull happens to produce a straighter ball flight (because the face matches the path) but the path itself is still incorrect and will become a slice if the face returns to open relative to the path under pressure.
- Working only on the face angle while leaving the out-to-in path unchanged — maintaining a closed face to match an out-to-in path is a compensation that requires precise timing every shot. Fixing the path is more reliable than managing the face to match a poor path.
In SwingVantage Motion Lab
A pull starts left with little curve, and Motion Lab does not read start direction or path from video. With clubhead marks on a down-the-line clip, it can note an over-the-top plane, which often goes with a pull. Imported launch-monitor sessions are checked for a pull pattern, and those numbers keep the device as their source.
Open Golf in Motion LabRelated terms
- आउट-टू-इनआउट-टू-इन एक क्लबहेड को बताता है जो बॉल से मिलते समय टारगेट लाइन के आर-पार बाईं तरफ कटता है, राइट-हैंडर के लिए — फेड, पुल और स्लाइस के नीचे की ओवर-द-टॉप डिलीवरी।
- स्लाइसएक स्लाइस राइट-हैंडेड गोल्फर के लिए दाईं तरफ बहती चली जाती है, जिससे डिस्टेंस और फेयरवे दोनों का नुकसान होता है। यह खेल का सबसे आम मिस है, और यह सिर की गति की दिशा से दाईं तरफ पॉइंट करती फेस से आता है।
- क्लब पाथक्लब पाथ वह हॉरिज़ॉन्टल दिशा है जिसमें इम्पैक्ट के ज़रिए क्लबहेड चल रहा होता है, टारगेट लाइन के सापेक्ष, डिग्री में। पॉज़िटिव मतलब इन-टू-आउट (एक ड्रॉ बायस); नेगेटिव मतलब आउट-टू-इन (एक फेड या स्लाइस बायस)।
- फेस-टू-पाथफेस-टू-पाथ इम्पैक्ट पर फेस एंगल और क्लब पाथ के बीच का अंतर है। यह वह अकेला नंबर है जो तय करता है कि बॉल कितना, और किस दिशा में, कर्व करता है।
Available in other languages
Related guides & benchmarks
Put this into your swing
Film one swing to see how your movement compares — free to start.
See a sample Golf report first