Pull
Een pull wordt zuiver geraakt en vliegt recht; hij vertrekt gewoon op de verkeerde lijn, richting links van je mikpunt voor een rechtshandige, zonder dat er iets hem terugbuigt.
Een pull in golf is een slag die links van het doel vertrekt (voor een rechtshandige golfer) en in een vrij rechte lijn naar links blijft gaan — zonder de rechts-naar-links-kromming van een hook. De bal lanceert links en blijft links gaan, wat aangeeft dat zowel het clubpad als de facehoek links van het doel wijzen. Volgens het D-plane-model van balvlucht ontstaat een pull wanneer het clubpad out-to-in is en de face recht staat ten opzichte van dat pad (wijzend links van het doel, maar in dezelfde richting als het pad). De rechte-naar-links-baan (geen kromming) bevestigt dat de verhouding tussen face en pad relatief recht is.
Pulls zijn nauw verwant aan het out-to-in-clubpad dat ook slices produceert — het verschil zit alleen in de facehoek bij impact. Wanneer een out-to-in-pad gecombineerd wordt met een open face (open ten opzichte van het pad), is het resultaat een pull-slice; wanneer datzelfde out-to-in-pad gecombineerd wordt met een rechte face (overeenkomend met de padrichting), is het resultaat een pull. Veel golfers die aan het terugdringen van hun slice werken, merken dat ze slagen beginnen te pullen als stap richting verbetering — het pad is nog steeds out-to-in, maar ze hebben de face succesvol gesloten ten opzichte van het pad, wat vooruitgang is, ook al mist de bal nog links.
Een pull die consistent en recht is (niet krommend) is doorgaans makkelijker aan te pakken dan een pull-slice, omdat het out-to-in-pad het resterende probleem is in plaats van zowel pad als face. Pad kan vaak aangepakt worden via transitiewerk (downswing geleid door het onderlichaam) zonder aanvullende face-managementveranderingen.
For a quick pull-cause check. This means place a head cover just outside the ball on the target side and practice swings. This means if you hit the head cover, your path is out-to-in. The goal is to swing inside the head cover, which trains the in-to-out or neutral path that eliminates pulls.
Diagnose pulls precisely with a launch monitor: check your club path number (negative = out-to-in, which produces pulls) and your face angle relative to path. If both are negative by the same amount (e.g., path -5°, face -5°), you are pulling. If face is less negative than path (e.g., path -5°, face -2°), you are pull-fading. Knowing the exact data lets you work on the specific variable (path) rather than guessing.
Example
Een rechte slag die links van de vlag vertrekt en links van de green landt — kaarsrecht maar de verkeerde richting — is een pull, geen hook.
How it shows up on video
A pull is visible as a shot starting and continuing left of the target with minimal curve. From a face-on camera angle, the body pattern that produces a pull is visible as the lead shoulder "throwing" outward and upward in the transition. This means the over-the-top move. This means which produces the out-to-in path. From down-the-line, the club travels outside the backswing plane in the downswing and arrives at the ball from outside the target line, crossing to the inside after impact.
Common mistakes
- Aiming right to compensate for pulls — accommodating the pull with aim adjustment reinforces the out-to-in path indefinitely. Fixing the transition sequencing is the correct solution.
- Confusing a pull with a pull-hook — a pull goes straight left; a pull-hook starts left and curves further left (or turns sharply left). The pull-hook indicates a closed face relative to an already out-to-in path, while a pull indicates the face is matching the path. Different combinations require different fixes.
- Thinking a pull is better than a slice and therefore acceptable — both pull and slice patterns involve an out-to-in path. The pull happens to produce a straighter ball flight (because the face matches the path) but the path itself is still incorrect and will become a slice if the face returns to open relative to the path under pressure.
- Working only on the face angle. At the same time, leaving the out-to-in path unchanged. This means maintaining a closed face to match an out-to-in path is a compensation that requires precise timing every shot. Fixing the path is more reliable than managing the face to match a poor path.
In SwingVantage Motion Lab
SwingVantage identifies pull patterns from ball flight direction (starting left, no curve or slight hook) combined with observable over-the-top shoulder movement in the transition from face-on video. Down-the-line video revealing the club traveling outside the backswing plane in the downswing provides the most direct evidence of the out-to-in path that produces pulls.
Related terms
- Out-to-InOut-to-in beschrijft een clubhead die linkswaarts over de doellijn snijdt terwijl hij de bal raakt, voor een rechtshandige — de over-the-top-aflevering onder fades, pulls en slices.
- SliceEen slice bloedt weg naar rechts voor een rechtshandige golfer, wat zowel afstand als fairway kost. Het is de meest voorkomende misser in het spel, en komt van een face die rechts van de bewegingsrichting van de kop wijst.
- Club PathClub path is de horizontale richting waarin de clubhead beweegt tijdens impact, ten opzichte van de doellijn, in graden. Positief is in-to-out (een draw-neiging); negatief is out-to-in (een fade- of slice-neiging).
- Face-to-PathFace-to-path is het verschil tussen facehoek en clubpad bij impact. Het is het ene getal dat bepaalt hoeveel, en welke kant op, de bal kromt.
Related guides & benchmarks
Put this into your swing
SwingVantage can spot this in your own swing — free to start.
See a sample Golf report first