Çekme
Bir çekme temiz vurulur ve düz uçar; sadece yanlış çizgide ayrılır, sağ elini kullanan biri için nişan almanın soluna gider, hiçbir şey onu geriye bükmez.
Golfte bir çekme, (sağ elini kullanan bir golfçü için) hedefin soluna başlayan ve oldukça düz bir çizgide sola doğru giden bir vuruştur — bir hook'un sağdan-sola kıvrımı olmadan. Top sola fırlar ve sola devam eder, bu hem kulüp yolunun hem de yüz açısının hedefin solunu gösterdiğini belirtir. Top uçuşunun D-plane modeline göre, bir çekme, kulüp yolu dıştan-içe olduğunda ve yüz o yola kare olduğunda (hedefin solunu gösterir ama yolla aynı yönde) oluşur. Düz-sol yörünge (kıvrım yok), yüz-yol ilişkisinin nispeten kare olduğunu doğrular.
Çekmeler, slice da üreten dıştan-içe kulüp yoluyla yakından ilişkilidir — fark yalnızca vuruş anındaki yüz açısındadır. Dıştan-içe bir yol açık bir yüzle (yola göre açık) eşleştiğinde, sonuç bir çekme-slice'tır; aynı dıştan-içe yol kare bir yüzle (yol yönüyle eşleşen) eşleştiğinde, sonuç bir çekmedir. Slice'larını azaltmak üzerinde çalışan birçok golfçü, iyileşmeye doğru bir adım olarak vuruşları çekmeye başladıklarını fark eder — yol hâlâ dıştan-içedir, ama yüzü yola göre başarıyla kapatmışlardır, bu ilerlemedir, top hâlâ sola kaçırsa bile.
Tutarlı ve düz olan (kıvrılmayan) bir çekme tipik olarak bir çekme-slice'tan ele alınması daha kolaydır çünkü kalan sorun hem yol hem de yüz değil, dıştan-içe yoldur. Yol genellikle ek yüz yönetimi değişiklikleri olmadan geçiş çalışmasıyla (alt-vücut-liderliğinde downswing) ele alınabilir.
For a quick pull-cause check. This means place a head cover just outside the ball on the target side and practice swings. This means if you hit the head cover, your path is out-to-in. The goal is to swing inside the head cover, which trains the in-to-out or neutral path that eliminates pulls.
Diagnose pulls precisely with a launch monitor: check your club path number (negative = out-to-in, which produces pulls) and your face angle relative to path. If both are negative by the same amount (e.g., path -5°, face -5°), you are pulling. If face is less negative than path (e.g., path -5°, face -2°), you are pull-fading. Knowing the exact data lets you work on the specific variable (path) rather than guessing.
Example
Bayrağın soluna başlayan ve yeşilin soluna inen düz bir vuruş — tamamen düz ama yanlış yönde — bir çekmedir, hook değil.
How it shows up on video
A pull is visible as a shot starting and continuing left of the target with minimal curve. From a face-on camera angle, the body pattern that produces a pull is visible as the lead shoulder "throwing" outward and upward in the transition. This means the over-the-top move. This means which produces the out-to-in path. From down-the-line, the club travels outside the backswing plane in the downswing and arrives at the ball from outside the target line, crossing to the inside after impact.
Common mistakes
- Aiming right to compensate for pulls — accommodating the pull with aim adjustment reinforces the out-to-in path indefinitely. Fixing the transition sequencing is the correct solution.
- Confusing a pull with a pull-hook — a pull goes straight left; a pull-hook starts left and curves further left (or turns sharply left). The pull-hook indicates a closed face relative to an already out-to-in path, while a pull indicates the face is matching the path. Different combinations require different fixes.
- Thinking a pull is better than a slice and therefore acceptable — both pull and slice patterns involve an out-to-in path. The pull happens to produce a straighter ball flight (because the face matches the path) but the path itself is still incorrect and will become a slice if the face returns to open relative to the path under pressure.
- Working only on the face angle. At the same time, leaving the out-to-in path unchanged. This means maintaining a closed face to match an out-to-in path is a compensation that requires precise timing every shot. Fixing the path is more reliable than managing the face to match a poor path.
In SwingVantage Motion Lab
SwingVantage identifies pull patterns from ball flight direction (starting left, no curve or slight hook) combined with observable over-the-top shoulder movement in the transition from face-on video. Down-the-line video revealing the club traveling outside the backswing plane in the downswing provides the most direct evidence of the out-to-in path that produces pulls.
Related terms
- Dıştan-İçeDıştan-içe, sağ elini kullanan biri için, kulüp başının topla buluşurken hedef çizgisi boyunca sola doğru kestiğini tanımlar — fade'lerin, çekmelerin ve slice'ların altındaki üstten-gelme teslimatı.
- SliceBir slice, sağ elini kullanan bir golfçü için sağa doğru kanar, hem mesafeye hem de fairway'e mal olur. Oyundaki en yaygın kaçırmadır ve kafanın seyahat yönünün sağını gösteren bir yüzden gelir.
- Kulüp YoluKulüp yolu, kulüp başının vuruş anı boyunca hedef çizgisine göre hareket ettiği yatay yöndür, derece cinsinden. Pozitif içten-dışadır (draw eğilimi); negatif dıştan-içedir (fade veya slice eğilimi).
- Yüz-YolYüz-yol, vuruş anında yüz açısı ile kulüp yolu arasındaki farktır. Topun ne kadar ve hangi yönde kıvrılacağını belirleyen tek sayıdır.
Related guides & benchmarks
Put this into your swing
SwingVantage can spot this in your own swing — free to start.
See a sample Golf report first