Tarikan ke Kiri (Pull)
Pull terpukul bersih dan terbang lurus; hanya saja meninggalkan garis yang salah, menuju ke kiri arah bidikan untuk pemain kidal-kanan tanpa ada yang membengkokkannya kembali.
Pull dalam golf adalah pukulan yang berawal di kiri target (untuk golfer kidal-kanan) dan bergerak dalam garis yang cukup lurus ke kiri — tanpa lengkungan kanan-ke-kiri seperti hook. Bola meluncur ke kiri dan terus ke kiri, menandakan bahwa baik club path maupun face angle mengarah ke kiri target. Menurut model D-plane lintasan bola, pull terjadi ketika club path out-to-in dan face square terhadap path tersebut (menghadap ke kiri target tetapi searah dengan path). Lintasan lurus-ke-kiri (tanpa lengkungan) mengonfirmasi bahwa hubungan face-terhadap-path relatif square.
Pull sangat berkaitan dengan club path out-to-in yang juga menghasilkan slice — bedanya hanya pada face angle saat impact. Ketika path out-to-in berpasangan dengan face terbuka (terbuka relatif terhadap path), hasilnya adalah pull-slice; ketika path out-to-in yang sama berpasangan dengan face square (searah dengan path), hasilnya adalah pull. Banyak golfer yang berusaha mengurangi slice mereka menyadari mereka mulai pull pukulan sebagai langkah menuju perbaikan — path-nya masih out-to-in, tetapi mereka berhasil menutup face relatif terhadap path, yang merupakan kemajuan meskipun bola masih meleset ke kiri.
Pull yang konsisten dan lurus (tidak melengkung) biasanya lebih mudah diatasi dibanding pull-slice karena path out-to-in adalah satu-satunya masalah yang tersisa, bukan path dan face sekaligus. Path sering bisa diatasi melalui pekerjaan transisi (downswing yang dipimpin tubuh bagian bawah) tanpa perlu perubahan pengelolaan face tambahan.
Tips by skill level
For a quick pull-cause check: place a head cover just outside the ball on the target side and practice swings — if you hit the head cover, your path is out-to-in. The goal is to swing inside the head cover, which trains the in-to-out or neutral path that eliminates pulls.
Diagnose pulls precisely with a launch monitor: check your club path number (negative = out-to-in, which produces pulls) and your face angle relative to path. If both are negative by the same amount (e.g., path -5°, face -5°), you are pulling. If face is less negative than path (e.g., path -5°, face -2°), you are pull-fading. Knowing the exact data lets you work on the specific variable (path) rather than guessing.
Example
Pukulan lurus yang berawal di kiri bendera dan mendarat di kiri green — lurus sempurna tapi arah yang salah — adalah pull, bukan hook.
How it shows up on video
A pull is visible as a shot starting and continuing left of the target with minimal curve. From a face-on camera angle, the body pattern that produces a pull is visible as the lead shoulder "throwing" outward and upward in the transition. The over-the-top move — which produces the out-to-in path. From down-the-line, the club travels outside the backswing plane in the downswing and arrives at the ball from outside the target line, crossing to the inside after impact.
Common mistakes
- Aiming right to compensate for pulls — accommodating the pull with aim adjustment reinforces the out-to-in path indefinitely. Fixing the transition sequencing is the correct solution.
- Confusing a pull with a pull-hook — a pull goes straight left; a pull-hook starts left and curves further left (or turns sharply left). The pull-hook indicates a closed face relative to an already out-to-in path, while a pull indicates the face is matching the path. Different combinations require different fixes.
- Thinking a pull is better than a slice and therefore acceptable — both pull and slice patterns involve an out-to-in path. The pull happens to produce a straighter ball flight (because the face matches the path) but the path itself is still incorrect and will become a slice if the face returns to open relative to the path under pressure.
- Working only on the face angle while leaving the out-to-in path unchanged — maintaining a closed face to match an out-to-in path is a compensation that requires precise timing every shot. Fixing the path is more reliable than managing the face to match a poor path.
In SwingVantage Motion Lab
A pull starts left with little curve, and Motion Lab does not read start direction or path from video. With clubhead marks on a down-the-line clip, it can note an over-the-top plane, which often goes with a pull. Imported launch-monitor sessions are checked for a pull pattern, and those numbers keep the device as their source.
Open Golf in Motion LabRelated terms
- Luar ke DalamOut-to-in menggambarkan clubhead memotong ke kiri melintasi garis target saat bertemu bola, untuk pemain tangan kanan — penghantaran over-the-top di balik fade, pull, dan slice.
- Slice (Melintir ke Kanan)Slice melenceng ke kanan untuk golfer kidal-kanan, menghabiskan jarak sekaligus fairway. Ini adalah miss paling umum dalam permainan, dan berasal dari face yang menghadap ke kanan dari arah perjalanan head.
- Jalur StikClub path adalah arah horizontal ke mana clubhead bergerak melewati impact, relatif terhadap garis target, dalam derajat. Positif berarti in-to-out (bias draw); negatif berarti out-to-in (bias fade atau slice).
- Muka Stik terhadap JalurFace-to-path adalah perbedaan antara face angle dan club path saat impact. Ini adalah angka tunggal yang menentukan seberapa banyak, dan ke arah mana, bola melengkung.
Available in other languages
Related guides & benchmarks
Put this into your swing
Film one swing to see how your movement compares — free to start.
See a sample Golf report first