Skip to main content

자동 번역입니다. 영어 버전이 기준이며, 표현은 점차 다듬어 나갈 예정입니다. 개선할 부분을 발견하셨나요? 알려주세요.

Intermediate

Definition

풀은 깨끗하게 맞아 곧게 날아간다. 다만 잘못된 라인으로 출발할 뿐이며, (오른손잡이 기준) 다시 돌아오게 할 것 없이 타깃 왼쪽으로 향한다.

골프에서 풀은 (오른손잡이 골퍼 기준) 타깃 왼쪽에서 시작해 훅의 우좌 곡선 없이 상당히 곧은 라인으로 왼쪽으로 이동하는 샷이다. 공은 왼쪽으로 발사되어 계속 왼쪽으로 가며, 이는 클럽 경로와 페이스 각도가 모두 타깃보다 왼쪽을 향하고 있음을 나타낸다. 볼 플라이트의 D-플레인 모델에 따르면, 풀은 클럽 경로가 아웃-인이고 페이스가 그 경로에 대해 스퀘어할 때(타깃보다 왼쪽을 향하지만 경로와 같은 방향) 발생한다. 곧게 왼쪽으로 가는 궤적(휘지 않음)은 페이스-경로 관계가 상대적으로 스퀘어함을 확인해준다.

풀은 슬라이스도 만들어내는 아웃-인 클럽 경로와 밀접하게 관련되어 있다 — 차이는 임팩트에서의 페이스 각도에만 있다. 아웃-인 경로가 (경로에 대해) 열린 페이스와 짝을 이루면 결과는 풀슬라이스다; 같은 아웃-인 경로가 (경로 방향과 일치하는) 스퀘어한 페이스와 짝을 이루면 결과는 풀이다. 슬라이스를 줄이려 노력하는 많은 골퍼들은 개선을 향한 한 단계로 샷을 풀하기 시작하는 것을 알아차린다 — 경로는 여전히 아웃-인이지만, 경로에 대해 페이스를 성공적으로 닫았으며, 공이 여전히 왼쪽으로 미스하더라도 이는 진전이다.

일관되고 곧은(휘지 않는) 풀은 일반적으로 풀슬라이스보다 다루기 쉬운데, 남은 문제가 경로와 페이스 둘 다가 아니라 아웃-인 경로 하나뿐이기 때문이다. 경로는 종종 추가적인 페이스 관리 변화 없이 트랜지션 작업(하체 리드 다운스윙)을 통해 다뤄질 수 있다.

Beginner tip

For a quick pull-cause check. This means place a head cover just outside the ball on the target side and practice swings. This means if you hit the head cover, your path is out-to-in. The goal is to swing inside the head cover, which trains the in-to-out or neutral path that eliminates pulls.

Advanced note

Diagnose pulls precisely with a launch monitor: check your club path number (negative = out-to-in, which produces pulls) and your face angle relative to path. If both are negative by the same amount (e.g., path -5°, face -5°), you are pulling. If face is less negative than path (e.g., path -5°, face -2°), you are pull-fading. Knowing the exact data lets you work on the specific variable (path) rather than guessing.

Example

깃발 왼쪽에서 시작해 그린 왼쪽에 떨어지는 곧은 샷 — 완전히 곧지만 방향이 잘못된 — 은 훅이 아니라 풀이다.

How it shows up on video

A pull is visible as a shot starting and continuing left of the target with minimal curve. From a face-on camera angle, the body pattern that produces a pull is visible as the lead shoulder "throwing" outward and upward in the transition. This means the over-the-top move. This means which produces the out-to-in path. From down-the-line, the club travels outside the backswing plane in the downswing and arrives at the ball from outside the target line, crossing to the inside after impact.

Common mistakes

  • Aiming right to compensate for pulls — accommodating the pull with aim adjustment reinforces the out-to-in path indefinitely. Fixing the transition sequencing is the correct solution.
  • Confusing a pull with a pull-hook — a pull goes straight left; a pull-hook starts left and curves further left (or turns sharply left). The pull-hook indicates a closed face relative to an already out-to-in path, while a pull indicates the face is matching the path. Different combinations require different fixes.
  • Thinking a pull is better than a slice and therefore acceptable — both pull and slice patterns involve an out-to-in path. The pull happens to produce a straighter ball flight (because the face matches the path) but the path itself is still incorrect and will become a slice if the face returns to open relative to the path under pressure.
  • Working only on the face angle. At the same time, leaving the out-to-in path unchanged. This means maintaining a closed face to match an out-to-in path is a compensation that requires precise timing every shot. Fixing the path is more reliable than managing the face to match a poor path.

In SwingVantage Motion Lab

SwingVantage identifies pull patterns from ball flight direction (starting left, no curve or slight hook) combined with observable over-the-top shoulder movement in the transition from face-on video. Down-the-line video revealing the club traveling outside the backswing plane in the downswing provides the most direct evidence of the out-to-in path that produces pulls.

Still have a question about ? Ask SwingVantage

Related guides & benchmarks

Put this into your swing

SwingVantage can spot this in your own swing — free to start.

See a sample Golf report first