Skip to main content

Tłumaczenie automatyczne. Wersja angielska jest wersją referencyjną; z czasem będziemy dopracowywać treść. Zauważyłeś coś do poprawy? Daj nam znać.

Beginner

Wysokość tee

Definition

Wysokość tee to to, jak wysoko piłka spoczywa na kołku tee. Przy driverze połowa piłki powinna znajdować się powyżej góry kija w adresie, by wspomóc dodatni kąt natarcia i wysoki lot.

Wysokość tee dla drivera to pionowa pozycja piłki nad ziemią, gdy jest ustawiona na tee — zwykle tak, by równik piłki znajdował się na wysokości górnej krawędzi twarzy drivera w adresie. Prawidłowa wysokość tee bezpośrednio wpływa na kąt natarcia, dynamiczny loft i tempo spinu, które razem determinują trajektorię i dystans. Piłka ustawiona zbyt nisko sprzyja opadającemu kątowi natarcia (zwiększając spin), podczas gdy piłka ustawiona zbyt wysoko sprzyja wznoszącemu kątowi natarcia (zmniejszającemu spin), ale może też powodować wysoki kontakt na twarzy kija (zmniejszający prędkość piłki na skutek efektu przekładni).

Zależność między wysokością tee a wynikami jest specyficzna dla zamachu każdego golfisty. Gracze o opadającym kącie natarcia powinni ustawiać piłkę wyżej, by wspomóc bardziej neutralne lub wznoszące uderzenie i zmniejszyć spin; gracze o bardzo wznoszącym kącie natarcia (uderzający znacząco w górę) mogą skorzystać z nieco niższego tee, by uniknąć uderzeń „sky” lub utraty prędkości piłki na skutek efektu przekładni przy kontakcie w górnej części twarzy kija. Współczesne dane launch monitora czynią te zależności konkretnymi: porównanie prędkości piłki, kąta wylotu i tempa spinu przy różnych wysokościach tee natychmiast wskazuje optymalną wysokość dla każdego golfisty.

Wysokość tee wpływa też na miejsce kontaktu z twarzą kija. Zbyt wysokie tee w połączeniu ze wznoszącym kątem natarcia daje efekt przekładni na skutek kontaktu w wysokiej części twarzy kija — piłka startuje wyżej, niż sugerowałby loft, przy zmniejszonej prędkości piłki (ponieważ sweet spot znajduje się blisko środka twarzy kija, a nie u góry). Zbyt niskie tee w połączeniu z opadającym kątem natarcia daje kontakt w niskiej części lub środku twarzy kija, z wyższym spinem i niższą, „nudną” trajektorią. Idealna strefa kontaktu dla drivera to środek lub nieco powyżej środka, co wymaga właściwego połączenia wysokości tee i kąta natarcia.

Tips by skill level

Beginner tip

For the driver, use this simple tee height rule: when you sole the driver normally at address, half the ball should be above the top edge of the club. If less than half is above the top, tee it higher; if most of the ball is above the top, tee it lower.

Advanced note

Use a launch monitor to test three tee heights (your normal height, 1/4 inch higher, and 1/4 inch lower) with 5 shots at each. Compare the average spin rate and ball speed — the tee height with the lowest spin combined with the highest ball speed is your optimal setting. Even a 200 RPM spin reduction from tee height adjustment can add 5–8 yards of carry at driver speeds above 100 mph.

Example

Ustawienie tee tak, by połowa piłki wystawała ponad górę drivera, zmienia kąt natarcia z −1° na +3°, ograniczając spin i dodając carry — wszystko dzięki regulacji wysokości tee.

How it shows up on video

Tee height is directly visible in setup video from face-on and down-the-line angles. The ball should appear to sit at the top edge of the clubface when the driver is soled at address. From face-on, a too-high tee shows the ball sitting significantly above the crown of the driver. A too-low tee shows the ball below the top edge. The consequences of incorrect tee height are visible in the trajectory. A skied ball (high and short) usually indicates a too-high tee with an ascending attack. A low, spinny drive indicates a too-low tee with a descending attack.

Common mistakes

  • Using the same tee height for every shot — different hole shapes, wind conditions, and shot shapes require different tee heights. A higher tee promotes a draw (reduces spin, higher launch); a lower tee promotes a controlled fade (more spin, lower launch). Adjusting tee height for specific shots adds versatility.
  • Not adjusting tee height for different drivers. A 460cc driver head sits higher off the ground than a 400cc head. This requires a different tee height to achieve the same face contact zone. Tee height should be calibrated to the specific driver being used.
  • Ignoring tee height as a distance variable. Many golfers work extensively on swing changes to add distance without ever checking whether their tee height is optimal. Tee height is a free distance variable that can add 10–20 yards when optimized.
  • Using a bent or broken tee without realizing it. A tee that is bent or partially broken sits the ball at an unexpected angle or height. This produces unintended contact patterns. Use a new tee for every drive when precision matters.

In SwingVantage Motion Lab

Motion Lab does not read tee height or the ball; neither is tracked in golf. Attack angle comes from a launch monitor you import, and its checks include a driver hit downward and low launch. To check tee height, film face-on at address and compare the ball with the top edge of the driver.

Still have a question about Wysokość tee? Ask SwingVantage

Related guides & benchmarks

Ready to work on your own swing?

This term is background, not something video measures. Film one swing to find the one thing to work on first — free to start.