Thời Điểm Lead (Lead Timing)
Also known as: lead off, lead thứ cấp
Thời điểm lead là khi nào và bao xa một baserunner rời base để dự đoán một quả bóng được đưa vào chơi hoặc một nỗ lực ăn cắp, đòi hỏi sự phối hợp với điểm buông của pitcher.
Under USA Softball rules, runners may not leave the base until the pitcher releases the ball (unlike baseball's lead-off rule). WBSC rules instead let a runner go once the pitcher's stride foot touches the ground. Getting a good lead means timing the first step to coincide exactly with the moment the rules allow, maximizing distance covered in the earliest possible moment. Leaving early is an out; leaving late wastes the opportunity. Runners read the pitcher's arm position and tendencies to pre-load their first step, compressing the time between release and leave.
Tips by skill level
Watch the pitcher's wrist — not the ball — during your lead. Your first step should fire the instant you see the hand pass the hip at the release point.
Develop different pre-load stances for steal-on versus non-steal pitches that look identical from the coaching box but allow different explosive first-step timing. This prevents defenders from reading your intentions from your setup position.
Example
Runner cất một cú bật hai-bước tại khoảnh khắc chính xác khi tay pitcher đi qua hông, đạt được một lợi thế nửa giây so với cú ném của catcher.
How it shows up on video
Look for the runner's first step landing exactly at the moment the pitcher's hand passes the hip in the windmill motion. This synchronization is the visible signature of elite lead timing. A runner leaving even two frames early in slow motion shows a foot already lifted and moving before the legal release point, explaining called early-leave outs that look close to players at full speed. Measure the distance covered in the runner's first two steps from the lead to quantify whether their pre-load position is maximizing legal momentum.
Common mistakes
- Using a static ready position rather than a pre-loaded weight-forward stance that allows explosive first-step acceleration immediately at release
- Watching the ball rather than the pitcher's hand during the windmill, causing a reaction-lag lead instead of an anticipation-based lead
- Taking the same secondary lead on every pitch regardless of whether a steal attempt is planned, removing the element of surprise when the steal is called
- Not accounting for different pitchers' tempo variations and using the same lead timing against both fast-tempo and slow-tempo deliveries
In SwingVantage Motion Lab
Motion Lab has no baserunning motion, so it cannot time your lead against the pitcher's release.
Frequently asked questions
Can a runner leave before the pitch is released in fast-pitch softball?
Not under USA Softball rules: the runner must stay on the base until the pitcher releases the ball, and leaving early is an out. WBSC rules let the runner go once the pitcher's stride foot lands.
What is a secondary lead?
The continuation of the runner's movement after the pitch passes the plate. A larger secondary lead on pitches in the dirt positions the runner to advance on a passed ball.
Sources
Related terms
- Ăn Cắp Base (Stolen Base)Một stolen base là sự tiến của một baserunner đến base tiếp theo theo sáng kiến của riêng họ trong một pitch, dựa vào một cú nhảy nhanh, đọc điểm buông của pitcher, và tốc độ vượt trội so với pop time của catcher.
- Đọc Pitcher (Reading the Pitcher)Đọc pitcher là khả năng của baserunner nhặt ra những manh mối thời điểm trong cú buông của pitcher — vị trí tay, nhịp điệu buông, hoặc độ nghiêng cơ thể — để tối ưu hóa lead và thời điểm ăn cắp của họ.
- Trở Về Base (Return to Base)Trở về base là khả năng của baserunner rút lui nhanh chóng về base ban đầu của họ khi bóng không được đưa vào chơi, tránh một pickoff hoặc tag-out sau lead của họ.
Available in other languages
Related guides & benchmarks
Put this into practice
Film one swing to see whether this is the thing to work on first — free to start.
See a sample Fast-Pitch Softball report first