Revolutions (Revs on the Ball)
Also known as: revs on the ball, spin rate in cricket, revolutions on the ball, putting revs on the ball, spin rate in spin bowling
Revolutions, or revs, describe how fast a spinner makes the ball rotate. More revs give the ball more spin to work with in the air and off the pitch. Spin rate is measured in revolutions per second or per minute (rpm).
Coaches and commentators talk about a spinner putting revs on the ball. It means spinning it hard. The bowler creates revs with the fingers, the wrist and the whole body, not the hand alone. A ball with more revs has more spin to grip the pitch. Higher revs also tend to go with a slower ball.
Numbers vary by study and by measuring system. In a 2009 lab study, elite off-spinners spun their stock ball at about 26.7 revolutions per second. That is about 1,600 rpm. A lower-level group managed about 22.2 per second, or about 1,330 rpm. A 2018 study found wrist spinners put more revs on the ball than finger spinners. Revs also helped separate elite bowlers from pathway bowlers. The body matters too. In elite finger spinners, the angle of the pelvis at front-foot landing and at release was the strongest link to spin rate.
Revs are not everything. England's spin consultant, Chris Brown, has said Monty Panesar spun the ball at about 1,700 rpm. Some less successful spinners reached about 2,400. Panesar's seam presentation was excellent, so the ball still turned. Cricket Australia's spin coach, Craig Howard, links high revs with slower pace. He says about 2,800 rpm goes with roughly 75 to 80 km/h.
Example
At an academy session, a ball-tracking unit reads a young leg-spinner's stock ball. Her coach notes the revs and the speed together. Next she works on a stronger pivot to add spin without slowing her arm.
Why it matters
Revs give a spinner the raw material for drift, dip, turn and bounce. They are one of the few spin skills that can be measured, so coaches use them to track progress.
Frequently asked questions
How many revolutions does a spinner put on the ball?
It varies by bowler and by study. In one lab study, elite off-spinners averaged about 26.7 revolutions per second, about 1,600 rpm. Wrist spinners usually generate more than finger spinners.
Do more revs always mean more turn?
No. The seam has to land on the pitch and the surface has to grip. England's spin consultant has noted that revs alone do not guarantee spin, and that a great seam position matters too.
Sources
- Chin A et al. The off-break and 'doosra': kinematic variations of elite and sub-elite bowlers in creating ball spin in cricket bowling. Sports Biomechanics 8(3):187-198, 2009 (abstract: 26.7 vs 22.2 rev/s)
- Spratford W et al. Does performance level affect initial ball flight kinematics in finger and wrist-spin cricket bowlers? Journal of Sports Sciences 36(6):651-659, 2018 (abstract)
- Sanders L, Felton PJ, King MA. Kinematic parameters contributing to the production of spin in elite finger spin bowling. Journal of Sports Sciences 36(24):2787-2793, 2018 (abstract)
- Wisden (5 Mar 2018): Learn from the pros, developing off-spinners with ECB spin consultant Chris Brown (Panesar about 1,700 rpm vs about 2,400)
- cricket.com.au (24 May 2019): Q&A, Inside an Aussie spin revolution, with Cricket Australia spin coach Craig Howard (about 2,800 rpm at 75-80 km/h)
Related terms
- Spin Bowling (Slow Bowling)Spin bowling is slow bowling in which the bowler spins the ball with the fingers or the wrist. The spin makes the ball curve in the air and change direction after it bounces. Spinners beat batters with turn, flight and changes of pace, not speed.
- Spin Axis (Over-Spin and Side-Spin)The spin axis is the line a spinning ball rotates around. Over-spin, with the ball rolling forward, makes it dip and bounce. Spin around an axis pointing down the pitch makes it turn off the surface. Most deliveries mix the two.
- Seam Position in Spin BowlingSeam position in spin bowling is the angle of the seam as the spinning ball travels. A seam that spins cleanly and lands on the pitch helps the ball grip and turn. A wobbling seam usually means less turn.
- Finger SpinFinger spin is spin bowling in which the fingers do most of the spinning, with a firmer wrist than in wrist spin. Off-spin and left-arm orthodox spin are finger spin. It is usually easier to control than wrist spin.
- Leg-SpinLeg-spin is spin bowling where a right-arm bowler spins the ball from leg to off: away from a right-handed batter, or left to right as that batter sees it. The bowler's wrist rotation provides the spin.
Available in other languages
Put this into practice
Film one shot to see whether this is the thing to work on first — free to start.