Skip to main content
Skip to main content
Beginner

Mid-Off and Mid-On

Also known as: mid-off, mid-on, mid off fielder, mid on fielder, short mid-off, where is mid on in cricket

Definition

Mid-off and mid-on are inner-ring positions either side of the bowler, in front of the batter. Mid-off is on the off side and mid-on is on the leg side. They stop straight drives and quick singles, and catch drives that go in the air.

For a right-handed batter, mid-off stands on the off side, a little to the bowler's left as the bowler runs in. Mid-on stands on the leg side, to the bowler's right. For a left-hander the two swap. Both are straighter than cover and midwicket.

New Zealand Cricket's coaching manual sets out the balance they must strike. They need to be far enough back to cut off a ball driven hard down the ground. They also need to be close enough that the batters cannot run a single to them. Getting that right depends on the field, the batter and the bowler. The manual stresses that both fielders must understand their angles.

The position moves with the plan. Short mid-off comes in for a batter who pushes the ball softly back down the pitch. In the final overs of limited-overs cricket, captains often push mid-off and mid-on back to long-off and long-on, because many balls are hit straight.

Mistimed drives often go to these two positions. A ball off the toe of the bat can drop short, so stay balanced and be ready to come forward.

Cricket field diagram: Mid-Off and Mid-OnOverhead schematic for a right-handed batter, bowler's end at the top. Highlighted: Mid-off (off side, in front of square, in the inner ring); Mid-on (leg side, in front of square, in the inner ring). For a left-handed batter the field is mirrored.Bowler’s endBatterOff sideLeg side12
  1. 1 Mid-off: off side, in front of square, in the inner ring
  2. 2 Mid-on: leg side, in front of square, in the inner ring

Schematic, not to scale, for a right-handed batter. For a left-hander the field is mirrored: off and leg swap sides. Exact spots move with the bowler, the batter and the captain’s plan.

Example

A batter drives too early at a slower ball. The ball comes off the toe and loops towards mid-off, who steps in and takes a simple catch.

Why it matters

Mid-off and mid-on control the straight singles that keep a batter's score moving. Wrong depth either gives away runs or lets drives through.

Frequently asked questions

What is the difference between mid-on and mid-off?

They stand either side of the bowler. Mid-off is on the batter's off side and mid-on is on the leg side. For a left-hander they swap.

How far back should mid-on stand?

Far enough to stop a firm drive, close enough to stop the single. New Zealand Cricket's coaching manual says to judge it by the field, the batter and the bowler.

Sources

Still have a question about Mid-Off and Mid-On? Ask SwingVantage

Ready to work on your own batting?

This term is background, not something video measures. Film one shot to find the one thing to work on first — free to start.