Long-Off and Long-On
Also known as: long-off, long-on, long off fielder, long on fielder, caught at long-on, caught at long-off
Long-off and long-on are deep positions straight down the ground, either side of the bowler's end. Long-off is on the off side and long-on on the leg side. They stop straight drives and catch lofted hits, especially late in limited-overs innings.
For a right-handed batter, long-off stands deep on the off side, behind the bowler and a little to one side. Long-on is the mirror spot on the leg side. For a left-hander, they swap. They are the deep versions of mid-off and mid-on.
New Zealand Cricket's coaching manual says the positioning is fairly simple. They drop straight back from mid-off and mid-on. The key judgment is depth. Most walk in from the edge of the boundary. On a big ground, NZC suggests coming in 5 to 10 m so the batters cannot run two.
Late in one-day and T20 innings these spots become vital. Bowlers aim full and straight, so many balls are hit down the ground. NZC says teams should place two very good fielders there. They should be fast, have good hands and strong arms, and ideally be tall. Height helps with catches that would carry over the boundary at a reachable height.
These fielders often take catches near the rope. Under Law 19.5, touching the ball while grounded beyond the boundary gives away a boundary. So these fielders must know where the rope is. A relay catch with a partner can save a ball that would carry over.
- 1 Long-off: off side, in front of square, out on the boundary
- 2 Long-on: leg side, in front of square, out on the boundary
Schematic, not to scale, for a right-handed batter. For a left-hander the field is mirrored: off and leg swap sides. Exact spots move with the bowler, the batter and the captain’s plan.
Example
In the last over, a batter goes straight for six. Long-on, a step in from the rope, jumps, takes the ball and stays inside the boundary.
Why it matters
Late in a limited-overs innings, many balls go straight down the ground to long-off and long-on. Good fielders there turn sixes into catches and twos into ones.
Frequently asked questions
What is the difference between long-on and long-off?
They stand deep either side of the bowler's end. Long-off is on the batter's off side, long-on on the leg side. For a left-hander they swap.
How deep should long-on stand?
Usually near the boundary. On a big ground, New Zealand Cricket suggests coming in 5 to 10 m to stop the batters running two.
Sources
- New Zealand Cricket, Development Coaching Course E-Manual, Section 4.0 Fielding: out fielding, long off and long on
- MCC Laws of Cricket, 2017 Code 4th Edition (2026), Law 19.5 (Fielder grounded beyond the boundary), pp. 61-62
- ESPNcricinfo, 'Cricket fielding positions' field map (PDF): long off, long on
Related terms
- Mid-Off and Mid-OnMid-off and mid-on are inner-ring positions either side of the bowler, in front of the batter. Mid-off is on the off side and mid-on is on the leg side. They stop straight drives and quick singles, and catch drives that go in the air.
- Straight DriveThe straight drive is a front-foot attacking stroke played to a full ball on or just outside off stump. It sends the ball back past the bowler, straight down the ground.
- Lofted DriveA lofted drive lifts the ball over the fielders instead of along the ground. Get close to the pitch of the ball, keep your head still and swing through the line with a full face and a high finish. Choose a full ball and check the field first. Decide whether you only need to clear the infield or go all the way.
- Outfield PlayOutfield play refers to fielding beyond the inner ring near the boundary, where players must intercept, chase, slide, and throw powerfully to prevent boundaries and effect run-outs.
- Death OversThe death overs are the final overs of a limited-overs innings, usually overs 17–20 in T20 or 41–50 in one-day cricket. Batters chase runs and bowlers try to limit them.
Available in other languages
Ready to work on your own batting?
This term is background, not something video measures. Film one shot to find the one thing to work on first — free to start.