वेट शिफ्ट
Also known as: वेट ट्रांसफर, फ्रंट-टू-बैक-टू-फ्रंट
वेट शिफ्ट लोड के दौरान पिछले पैर से स्विंग के दौरान अगले पैर तक शरीर के वज़न का जानबूझकर स्थानांतरण है, जो संपर्क पर पावर जोड़ने वाला आगे का मोमेंटम पैदा करता है।
एक सही वेट शिफ्ट लोड पर पिछले पैर पर वज़न से शुरू होती है, फिर संपर्क के ज़रिए हिप घूमने पर एक ब्रेस्ड फ्रंट लेग में स्थानांतरित होती है। बहुत जल्दी शिफ्ट करना (पिच के गिरने से पहले) एक झपट है जो रोटेशनल पावर को खत्म कर देती है; बिल्कुल शिफ्ट न करना एक आर्म-प्रभुत्व वाला स्विंग पैदा करता है। संपर्क पर फ्रंट लेग को दृढ़ होना चाहिए — एक ढहती फ्रंट साइड ऊर्जा बहा देती है। स्लो पिच में, बॉल के हवा में रहने का लंबा समय हिटरों को जानबूझकर अभ्यास के साथ क्रम को परिपूर्ण करने का अवसर देता है।
Tips by skill level
Check your finish: if you can hold your finish position for three full seconds with nearly all weight on your lead leg and the trail foot balanced on its toe, your weight transfer is correct.
Train weight transfer with a drill: start with your feet together, then stride with your front foot and immediately swing — the forced stride makes the transfer sequential and physical rather than something to think about.
Example
लोड पर 60% वज़न पिछले पैर पर शुरू होता है, फिर संपर्क पर एक ब्रेस्ड फ्रंट लेग पर 90% — हिटर का शरीर बॉल में रिलीज़ होने वाला एक कुंडलित स्प्रिंग है।
How it shows up on video
From a front-on camera, weight transfer shows the trail heel lifting off the ground during the downswing as the majority of body mass moves toward the lead side. A reverse pivot shows opposite movement: the lead hip drifts backward while the trail foot stays grounded through the entire swing. The finish position is a reliable indicator. A hitter who cannot hold their finish with 90 percent of weight on the lead leg has not completed their weight transfer.
Common mistakes
- Reverse pivoting by loading the lead foot in the load phase rather than the trail foot. This puts weight on the wrong side going into the swing and destroys power
- Hanging back and failing to complete the transfer to the lead side through contact. This forces the hands to flip at the ball to compensate for the stalled lower body
- Sliding the entire body toward the pitcher instead of rotating around a stable lead leg, which moves the swing center off the ball
- Transferring weight too early by lunging toward the pitcher before the pitch arrives, arriving with all weight shifted and no stored energy left to rotate into the ball
In SwingVantage Motion Lab
Motion Lab estimates your weight shift from your centre-of-mass movement and reads your trail heel and lead leg from pose. It flags drifting forward before contact.
Open Slow-Pitch Softball in Motion LabRelated terms
- लोडलोड पीछे की ओर वज़न शिफ्ट और हाथों का कॉइल है जो स्विंग शुरू करने से पहले हिटर को एक तैयार, घुमावदार स्थिति में सेट करता है। स्लो पिच में, लोड जल्दी होना चाहिए और लंबे-आर्क वाली बॉल के गिरने के दौरान बना रहना चाहिए।
- हिप रोटेशनहिप रोटेशन स्विंग के दौरान पिचर की ओर हिप का मुड़ना है — एक स्लो-पिच हिटर में रोटेशनल पावर का सबसे बड़ा स्रोत।
- बैक-साइड मैकेनिक्सबैक-साइड मैकेनिक्स इस बात को संदर्भित करता है कि स्विंग के ज़रिए ट्रेल हिप, नी, और पैर कैसे फायर होते हैं — "इंजन" साइड जो ज़मीन से बैरल तक रोटेशनल पावर चलाती है।
- स्ट्राइड टाइमिंगस्ट्राइड टाइमिंग यह है कि अगला पैर पिच के आर्क में उसकी पोज़िशन के सापेक्ष कब उतरता है। स्लो-पिच आर्क के खिलाफ, अगले पैर को जल्दी उतरना चाहिए — पीक के पास — जबकि हाथ पीछे रहते हैं, जो निचले शरीर और ऊपरी शरीर के बीच वह अलगाव बनाता है जो पावर पैदा करता है।
Available in other languages
Related guides & benchmarks
Put this into your swing
Film one swing to see how your movement compares — free to start.
See a sample Slow-Pitch Softball report first